User Manual
Table Of Contents
- Contents
- SCH-a690 closed view
- SCH-a690 open view
- Introduction
- Understand your phone
- Antenna
- Backlight features
- Clear key
- End key
- Headset connector
- LED indicator
- Right soft key
- Left soft key
- Push to Talk Key
- Microphone
- Speaker phone
- Speaker phone key
- Alpha-Numeric keypad
- Send key
- Navigation key
- Volume Key
- Get it now
- Your phone’s display
- Install the battery
- Remove the battery
- Charge the battery
- Battery indicator
- Low battery indicator
- Your phone’s modes
- Get Started
- Menus and sub menus
- Accessibility
- Calls
- Call features
- Push to Talk
- Push to Talk Login
- Push to Talk prompts during a conversation
- Create and Manage your Push to Talk Contact List online
- Access the Push to Talk Contact List from your device
- Initiate a one-to-one Push to Talk Call
- End a one-to-one Push to Talk call
- Initiate a one-to-many Push to Talk call
- Initiate a Push to Talk call with the flip closed
- Initiate a Push to Talk call from the Recent calls list
- Initiate a Push to Talk call from the menu
- Push to Talk dialing through the keypad
- Receive a one-to-one barge call
- Initiate a Push to Talk alert
- Receive a Push to Talk alert
- Push to Talk Silent Mode
- The Phone Book
- Tip: One-Touch, Two-Touch, and Three-Touch Dialing makes it easy to call phone numbers stored in your Phone Book.
- Open the Phone Book
- Find
- Add information to your Phone Book
- Rename group
- Edit Phone Book numbers
- Pauses
- Pause dial from the Phone Book
- Manual pause calling
- Erase individual phone book entries
- Edit an existing e-mail address
- Assign speed dial numbers
- Store numbers after a call
- Store numbers from call logs
- Shortcuts to storing phone numbers
- One-touch dialing
- Two-touch dialing
- Three-touch dialing
- Memory dialing
- My phone #
- Messages
- Message folders
- Mobile web
- Get It Now
- Planner
- Display
- Sounds
- Voice kit
- Setup
- Location
- Network
- Data
- Security
- Important! If you change the NAM1 setting you set the phone to lock on power-up and don’t program a number into NAM2, you won’t be able to access your phone. You must call the Service Center to unlock your phone.
- Important! Because of various transmission methods, network parameters, and user settings used to complete a call from your wireless phone, a connection cannot always be guaranteed. Therefore, emergency calls may not be available at all times.
- Important! DO NOT depend on this phone as a primary method of calling 911 or for any other essential or emergency numbers.
- Tip: Press and hold to erase all characters from the screen.
- Call Answer
- Auto Answer
- Auto Retry
- Language
- Clock Set
- Version
- Usage guidelines: All about performance and safety
- Limited Warranty
100
Lock the phone
The
Security menu allows you to lock the phone manually or
automatically when powering on your phone or to leave the
phone unlocked.
1. In standby mode, press the left soft key ( ) Menu, then
press ,
.
2. Enter the lock code. The default lock code is the last four
digits of your telephone number.
3. Press
for
Lock Phone and use the navigation keys to
select from the options in the following table.
Important! If you change the NAM1 setting you set the
phone to lock on power-up and don’t program a number into
NAM2, you won’t be able to access your phone. You must
call the Service Center to unlock your phone.
4. Press to save your settings.
Unlock the phone
Enter your phone’s lock code (last four digits of the phone
number), and the phone is immediately unlocked.
Emergency calls in lock mode
You can place emergency calls using confidential numbers
that you program in lock mode.
Option Function
Never The phone remains unlocked.
On Power-up
The phone locks automatically the next time it
is powered on. It stays locked until you enter
the lock code.
Now
The phone locks immediately and stays
locked until you enter the lock code.