User Manual
Table Of Contents
- Contents
- SCH-a690 closed view
- SCH-a690 open view
- Introduction
- Understand your phone
- Antenna
- Backlight features
- Clear key
- End key
- Headset connector
- LED indicator
- Right soft key
- Left soft key
- Push to Talk Key
- Microphone
- Speaker phone
- Speaker phone key
- Alpha-Numeric keypad
- Send key
- Navigation key
- Volume Key
- Get it now
- Your phone’s display
- Install the battery
- Remove the battery
- Charge the battery
- Battery indicator
- Low battery indicator
- Your phone’s modes
- Get Started
- Menus and sub menus
- Accessibility
- Calls
- Call features
- Push to Talk
- Push to Talk Login
- Push to Talk prompts during a conversation
- Create and Manage your Push to Talk Contact List online
- Access the Push to Talk Contact List from your device
- Initiate a one-to-one Push to Talk Call
- End a one-to-one Push to Talk call
- Initiate a one-to-many Push to Talk call
- Initiate a Push to Talk call with the flip closed
- Initiate a Push to Talk call from the Recent calls list
- Initiate a Push to Talk call from the menu
- Push to Talk dialing through the keypad
- Receive a one-to-one barge call
- Initiate a Push to Talk alert
- Receive a Push to Talk alert
- Push to Talk Silent Mode
- The Phone Book
- Tip: One-Touch, Two-Touch, and Three-Touch Dialing makes it easy to call phone numbers stored in your Phone Book.
- Open the Phone Book
- Find
- Add information to your Phone Book
- Rename group
- Edit Phone Book numbers
- Pauses
- Pause dial from the Phone Book
- Manual pause calling
- Erase individual phone book entries
- Edit an existing e-mail address
- Assign speed dial numbers
- Store numbers after a call
- Store numbers from call logs
- Shortcuts to storing phone numbers
- One-touch dialing
- Two-touch dialing
- Three-touch dialing
- Memory dialing
- My phone #
- Messages
- Message folders
- Mobile web
- Get It Now
- Planner
- Display
- Sounds
- Voice kit
- Setup
- Location
- Network
- Data
- Security
- Important! If you change the NAM1 setting you set the phone to lock on power-up and don’t program a number into NAM2, you won’t be able to access your phone. You must call the Service Center to unlock your phone.
- Important! Because of various transmission methods, network parameters, and user settings used to complete a call from your wireless phone, a connection cannot always be guaranteed. Therefore, emergency calls may not be available at all times.
- Important! DO NOT depend on this phone as a primary method of calling 911 or for any other essential or emergency numbers.
- Tip: Press and hold to erase all characters from the screen.
- Call Answer
- Auto Answer
- Auto Retry
- Language
- Clock Set
- Version
- Usage guidelines: All about performance and safety
- Limited Warranty
Understand your phone 5
• Press
once to disconnect a call, return to standby
mode, or cancel any input.
Headset connector
The headset connector is the input jack where the optional
hands-free headset connects. The headset includes an
earbud and microphone in a convenient, lightweight unit so
you can talk without using your hands.
• Before connecting the headset, gently pry open the
cover of the input jack on the phone to expose the
connector inside.
LED indicator
There are two LED indicators on either side of the outside
display. Both indicators work in unison and have the
following functions.
• Flash to indicate an incoming call or message.
• Light momentarily when you power up the phone.
• Flash when the Service LED function is set to
On.
Right soft key
Right soft key ( ) functions are determined by what appears
above it in the display. Some functions of the right soft key
are as follows:
• Press the right soft key ( ) Back to return to standby
mode from any main menu.
• Press the right soft key ( )
Back to return to the
previous menu from any sub menu.
• In standby mode, press the right soft key ( )
Contacts
to enter the
Contacts list.