User Manual
Table Of Contents
- Contents
- SCH-a690 closed view
- SCH-a690 open view
- Introduction
- Understand your phone
- Antenna
- Backlight features
- Clear key
- End key
- Headset connector
- LED indicator
- Right soft key
- Left soft key
- Push to Talk Key
- Microphone
- Speaker phone
- Speaker phone key
- Alpha-Numeric keypad
- Send key
- Navigation key
- Volume Key
- Get it now
- Your phone’s display
- Install the battery
- Remove the battery
- Charge the battery
- Battery indicator
- Low battery indicator
- Your phone’s modes
- Get Started
- Menus and sub menus
- Accessibility
- Calls
- Call features
- Push to Talk
- Push to Talk Login
- Push to Talk prompts during a conversation
- Create and Manage your Push to Talk Contact List online
- Access the Push to Talk Contact List from your device
- Initiate a one-to-one Push to Talk Call
- End a one-to-one Push to Talk call
- Initiate a one-to-many Push to Talk call
- Initiate a Push to Talk call with the flip closed
- Initiate a Push to Talk call from the Recent calls list
- Initiate a Push to Talk call from the menu
- Push to Talk dialing through the keypad
- Receive a one-to-one barge call
- Initiate a Push to Talk alert
- Receive a Push to Talk alert
- Push to Talk Silent Mode
- The Phone Book
- Tip: One-Touch, Two-Touch, and Three-Touch Dialing makes it easy to call phone numbers stored in your Phone Book.
- Open the Phone Book
- Find
- Add information to your Phone Book
- Rename group
- Edit Phone Book numbers
- Pauses
- Pause dial from the Phone Book
- Manual pause calling
- Erase individual phone book entries
- Edit an existing e-mail address
- Assign speed dial numbers
- Store numbers after a call
- Store numbers from call logs
- Shortcuts to storing phone numbers
- One-touch dialing
- Two-touch dialing
- Three-touch dialing
- Memory dialing
- My phone #
- Messages
- Message folders
- Mobile web
- Get It Now
- Planner
- Display
- Sounds
- Voice kit
- Setup
- Location
- Network
- Data
- Security
- Important! If you change the NAM1 setting you set the phone to lock on power-up and don’t program a number into NAM2, you won’t be able to access your phone. You must call the Service Center to unlock your phone.
- Important! Because of various transmission methods, network parameters, and user settings used to complete a call from your wireless phone, a connection cannot always be guaranteed. Therefore, emergency calls may not be available at all times.
- Important! DO NOT depend on this phone as a primary method of calling 911 or for any other essential or emergency numbers.
- Tip: Press and hold to erase all characters from the screen.
- Call Answer
- Auto Answer
- Auto Retry
- Language
- Clock Set
- Version
- Usage guidelines: All about performance and safety
- Limited Warranty
88
Ringer type — planner
To activate, view or change the ringer type for your planner:
1. In standby mode, press the left soft key ( )
Menu, then
press , for
Ringer Type.
2. Press for
Planner.
3. Use the volume key ( ) to browse up and down through
the tones. Each tone plays as it appears in the display.
4. When the desired ringer type plays, press to save
the setting.
Key beep
Key Beep allows you to adjust the tone length and volume
level that the keypad generates each time you press a key.
The display icon shows up to five levels (the loudest setting).
No bars indicate that the key beep function is silenced.
1. In standby mode, press the left soft key ( )
Menu, then
press , for Key Beep.
2. Press
for
Volume or press for Tone Length.
3. Use the side volume key ( ) to browse up and down
through the tones. Each tone plays as it appears in
the display.
4. When the desired ringer type plays, press to save
the setting.
Alerts
Your phone may beep from time to time, this is called an alert
beep and can easily be turned on or off. Alert beep is offered
for the following:
Minute beep, Service, Connect, Disconnect,
Fade, Roam, and Privacy.