User Guide

Section 8: Changing Your Settings 113
Phone Settings
Section 8
2. Press
Security.
You’re prompted to enter the lock
code. The default lock code is the last four digits of your
telephone number.
3. Press Edit Code. Two options are available Device
and Location. Use the navigation keys to highlight your
choice and press .
4. At the “ENTER NEW LOCK CODE” or “ENTER NEW
LOCATION LOCK CODE” prompt, enter the new lock
code. You’re prompted to confirm the new lock code.
5. “DEVICE CODE SET” or “LOCATION LOCK CODE SET”
message appears in the display confirming that your lock
code has been changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Resetting Your Phone
Reset Phone returns all setup options to their factory
default.
1. In standby mode, press MENU, use the right
navigation key to highlight SETTINGS & TOOLS.
Press Phone Settings. The Phone Settings menus
are listed in the display.
2. Press Security, and enter the lock code. Press
Reset Phone. A prompt appears in the display asking if
you wish to restore default settings (except for the
Contacts).