User Guide

40
Section 3
To access the VoiceSignal Settings menu, follow these
steps:
1. At the standby screen, press MENU. Use the right
navigation key to highlight SETTINGS & TOOLS.
2. Press Tools, then Voice Commands, and
Voice Settings.
3. Use the navigation keys to select the setting you want to
change. The following options are available:
Choice Lists: If VoiceSignal is not absolutely confident that it
has correctly identified a name or number, it can display a
choice list of up to three possibilities, and prompt you to
confirm the correct one. You can control when choice lists
appear by changing the Choice Lists setting to the following:
Automatic: VoiceSignal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
Always On: When there are multiple alternatives,
VoiceSignal always displays a choice list.
Always Off: VoiceSignal never displays a choice list. Instead,
the application picks the best from among the possible
choices.
Sensitivity: In VoiceSignal, sensitivity controls the balance
between rejecting too much, which means the phone
frequently does not recognize names, numbers, or
commands, and rejecting too little, which means it
frequently recognizes something even if nothing was said.
When VoiceSignal rejects an utterance, it displays a
message such as “Please repeat…” or “No match found.” If
you frequently experience these messages, you might be
able to get better recognition by adjusting the Sensitivity
setting toward Reject Less. If you frequently experience