User Guide

Section 3: Call Functions 43
VoiceSignal®
Section 3
7. Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four
digits appearing in the display.
Wait for the beep and repeat the digits using your normal
tone of voice.
8. After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then re-record.
Repeat this step until you’re satisfied with the recording.
9. After confirming that the recording sounds ok, repeat the
recording process with the next set of digits. After ten
sets of digits, the phone indicates that adaptation is
complete.
Reset Digit Dial Adaptation
This option erases an adaptation and resets Digit Dial to
its original state.
1. At the standby screen, press MENU. Use the right
navigation key to highlight SETTINGS & TOOLS.
2. Press Tools, then Voice Commands.
3. Press Voice Settings, then Digit Dialing.
4. Highlight Reset Digits and press . The Reset
Digit Adaptation screen displays requesting confirmation
of reset.