User Guide

44
Section 3
Note: If you have not performed the Adapt Digits function, the Reset Digits
option will not be accessible.
5. Press to proceed. Digit Adaptation Reset is
completed.
VoiceSignal Commands
The following is a list of functions that you can perform
using VoiceSignal speech recognition on your phone.
• Call <Name or #>: Dial by saying a Name in your Contacts List
or a Name and a Location (home, work, mobile).
• Send Text<Name>: Send a text message to a number or to
someone in your Contacts List.
• Send Picture <Name>: Send a PIX message to a number or to
someone in your Contacts List.
• Lookup <Name>: Open the contact record for any name in
your Contacts List.
• Go to <Menu>: Open any application installed on your device.
• Check <Item>: Provides details of your coverage, signal
strength, and battery level.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in
your Contacts list. See page 67 for information on creating
a Contacts list.
1. In standby mode, press and hold the key.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the earpiece.