User guide

Synchronization 120
Synchronization
1. Insert the Getting Started CD into the CD-ROM drive of your desktop
computer. Alternatively, double-click the downloaded Microsoft® ActiveSync®
installer.
2. Follow the instructions on the screen for installing Microsoft® ActiveSync®.
When installation is completed, the Synchronization Setup Wizard helps you
to connect your phone to your desktop computer, to set up a partnership.
3. Follow the instructions on the screen.
Your first synchronization process will automatically begin when your phone is connected
to the computer. After the first synchronization, take a look at Contacts, Calendar, and
Tasks on your phone. You will notice that your information has been copied to the phone.
Setting Up a Partnership
After you’ve installed ActiveSync, connect one end of the PC data cable to the jack on the
bottom of the phone and the other end to the USB port on your computer, you’re prompted
to setup a sync partnership.
1. To setup your sync partnership between the PC and your device tap Next.
2. Enter a unique name for your device and click Next.
3. Select or deselect the desired applications that you wish to synchronize, then
click Next.
4. Click the square to allow wireless data connections on your device while
connected to your computer. If selected a checkmark will display in the box.
5. Click Finish.
6. Your Omnia and the PC should perform the first ActiveSync. This may take
some time, depending on the amount of information that needs to be
synchronized.
Customizing Connection Settings
To establish a connection between your computer and the phone, you must enable the
connections you want to use in the ActiveSync® program. By default, all connections are
enabled.
1. From the ActiveSync® window on your computer, select File > Connection
Settings...
2. Change the connection settings.
Note: If your phone is not connected to the computer, click this button to establish a
connection.