User guide

153 Safety
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient/relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: At very high volumes, prolonged listening to a headset can damage your
hearing.
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy absorbed in the
head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring, and calculation
process. It does not represent how much RF the phone emits. All phone models are tested
at their highest value in strict laboratory settings. However, when in operation the SAR of a
phone can be substantially less than the level reported to the FCC. This is because of a
variety of factors including its proximity to a base station antenna, phone design, and other
factors. What is important to remember is that each phone meets strict federal guidelines.
Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial margin of
safety. As stated above, variations in SAR values between different model phones do not
mean variations in safety. SAR values at or below the federal standard of 1.6 W/kg are
considered safe for use by the public.
The highest reported SAR values of the SCH-i910 are:
1.31 W/kg CDMA Head SAR
1.18 W/kg PCS Head SAR