User guide

65 Messaging
Tip: Before you can send and receive E-mail using your ISP, see "Setup of an ISP" on
page 65.
Setup of an ISP
Before you can send E-mail directly, you’ll need to configure your Omnia to work through
an existing account with an Internet Service Provider (ISP) or your network at work. To
configure your Omnia to work with an ISP:
1. From the Today screen, tap the right soft key function Main Menu > Message
> Setup E-mail.
2. Enter your e-mail address and password. Tap Next.
3. Tap Next again. Your Omnia will attempt to automatically find the mail settings
for your account.
4. If successful, proceed to Step 6 > Step 10. If not, tap Next to proceed for the
next step.
5. Select Internet e-mail form the drop down box.
6. Enter your name, select Next.
7. Enter the incoming mail server address and choose the Account Type. Tap
Next.
8. Type in your Username, Password and if desired, check the Save Password
box. Tap Next.
9. Enter the outgoing mail server name, check the box if authentication is
required. Tap Next.
10. Use the drop down box to choose how often you want to sync. Tap Finish.
Message Folders
The following is a list of Text folders and their function.
• Deleted Items: Deleted messages are sent to the Deleted Items folder. Once
messages are removed from the Deleted Items folder, they are permanently
erased.
• Drafts: Drafts contain all messages that were not completed and saved to be sent
at a later date.
• Inbox: All incoming messages arrive and are stored in the Inbox until deleted. If
memory is full, new messages are rejected. Delete older messages to free up
space for incoming messages.