User guide

71 Contacts
6. Tap to exit and return to the previous screen.
Accepting Incoming Beams
To set your Omnia to accept all incoming beams, follow these steps:
1. From the Today screen, drag and drop the Wireless Manager widget
onto the Today screen.
2. Tap the Bluetooth Settings icon > Mode tab.
3. Tap the box Turn on Bluetooth and the box Make this device visible to
other devices. A check mark will display in the boxes.
4. Tap to start receiving incoming beams.
Adding Notes to Contacts
Notes allow you to attach either a recorded audio file or attach a written note to a saved
contact entry. When you view the summary screen on the contact, you can view or listen to
any notes that are associated with the contact.
Adding a Note
1.
From the Today screen, tap Start located in the upper left corner of the
screen.
2. Tap Contacts.
3. Tap the Enter a name field and use the virtual QWERTY keyboard to enter
the first few characters of the contact entry or scrolling through the contact list.
Tap the desired contact.
4. Tap the Notes tab.
5. Tap the left soft key function Edit to open the notepad.
6. Enter the note using the desired entry method (such as the QWERTY
keyboard).
7. After the note has been successfully entered, tap to return to the previous
screen.
Deleting a Note
1.
From the Today screen, tap Start located in the upper left corner of the
screen.
2. Tap Contacts.
3. Tap the Enter a name field and use the virtual QWERTY keyboard to enter
the first few characters of the contact entry or scrolling through the contact list.
Tap the desired contact.