User Manual (ver.F1)

41
The Add Contacts screen appears in the display showing a
list of Contacts entries.
4. Do one of the following:
• Use the Navigation key to highlight an entry you want to add to the
group, then press MARK . A checkmark appears in the entry’s
checkbox.
Repeat as needed to check all the desired Contacts.
• Press Mark All .
Note: To unmark a marked Contact, highlight the Contact and press MARK to
clear the checkmark.
5. When you have marked the Contacts you want to add to
the group, press Done . “ Contact added to group ” appears in
the display, followed by the selected Group list including
the added Contacts.
Rename a Group
The Rename option lets you change the name any of the Groups,
except No Group.
1. In standby mode, press MENU ➔ Contacts ➔ Group . The
Group List screen appears in the display.
2. Use the Navigation key to highlight the Group name other
than No Group that you wish to change, then press
Options . The following options pop up in the display:
• Send Txt Msg
•Rename
•Erase
•Add
3. Use the Navigation key to highlight Rename , then press
.
The Rename Group screen appears in the display.
4. Enter changes to the group name using the keypad. (For
more information, refer to “Entering Text” on page 27)
5. When you have completed your changes to the Group
name, press SAVE .
“ Group Renamed ” appears in the display followed by the
Group List screen showing your renamed Group.
Add a New Group
The New option lets you add Groups.
1. In standby mode, press MENU ➔ Contacts ➔ Group . The
Group List screen appears in the display.