User Manual (ver.F1)

Tools 64
5.
Use the Up/Down navigation keys to highlight the following
New Event options:
• Start Date — Populated with highlighted Calendar date. To change
the date, use the keypad.
•Start Time — Populated with the current time (rounded to the
nearest half-hour). To change the time, use the keypad.
– Use the Left/Right navigation keys to select AM or PM .
• End Date — Populated with highlighted Calendar date. To change
the date, use the keypad.
• End Time — Populated with a time one half-hour later that Start
Time . To change the time, use the keypad.
– Use the Left/Right navigation keys to select AM or PM .
•Alert — Select Tone / Vibrate / Light Only using the Left/Right
navigation keys.
– To select a particular Tone, use the Up/Down navigation keys to highlight
the current Tone and press the Left/Right navigation key. The
Alert
Tone
menu appears in the display. (For more information, refer to
“Ringer Type” on page 77)
• Reminder — Select Once / Every 2 Minutes / Every 15 Minutes /
Off using the Left/Right navigation keys.
•Alert Time — Select 15 Min. Before / 30 Min. Before / 1 Hour
Before / 3 Hours Before / 5 Hours Before / 1 Day Before / On
Time / 5 Min. Before using the Left/Right navigation keys.
6. To store this Event in your Calendar, press SAVE . An alarm
will notify you prior to the Event, if Reminder is set to a
value other than Off .
View/Change an Event
1. From the Tools menu, select Calendar .
A calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
2. Navigate to a desired date. (For more information, refer to
“Navigating the Calendar” on page 63)
3. To open the highlighted date and show a list of Events,
press VIEW .
4. Highlight an Event to view, then press VIEW to display the
specifics of the highlighted Event.
5. To scroll the Event contents, use the Up/Down navigation
keys.
6. To change the event details, press Edit . (For more
information, refer to “Add a New Event” on page 63)