User Manual (ver.F1)

79
2.
Select the desired setting.
Auto Retry
Auto Retry automatically re-dials a number if there is no answer
or the dialed party is busy. Depending upon your location, the
number of times your phone redials a number may vary.
1. From the Settings menu, select Call Settings ➔ Auto Retry .
The following options appear in the display:
•Off
• Every 10 Seconds
• Every 30 Seconds
• Every 60 Seconds
2. Select the desired setting.
TTY Mode
Your phone is fully Teletypewriter (TTY)/Telecommunication
Device for the Deaf (TDD) compatible. You connect TTY/TDD
equipment to the headset connector on the right side your phone.
TTY Mode must be enabled (TTY Full selected) before you can
use your phone with TTY/TDD equipment.
1. From the Settings menu, select Call Settings ➔ TTY Mode .
A message pops-up warning of possible headset and non-
TTY accessory performance impairment when in TTY mode
and prompting you to confirm that you want to enable/
disable TTY Mode.
• Press Yes to change the TTY Mode setting.
• Press No to keep the current TTY Mode setting.
If you press Yes , the following settings appear in the
display:
•TTY Full — Enables TTY mode while letting you hear and speak
with the other party.
• TTY + Talk — Enables TTY mode while letting you speak with the
other party.
•TTY + Hear — Enables TTY mode while letting you hear the other
party.
•TTY Off — Disables TTY mode.
Note: The TTY Mode option has no effect on the phone’s earpiece,
microphone, or speaker. When you select
TTY Full , all currently
enabled sound functions remain enabled.
2. Select the desired setting. You’re returned to the previous
menu and the TTY icon ( ) appears in the top of the
display.