SCH-R350 Series P O R T A B L E M O B I L E T R I - B A N D P H O N E User Manual Please read this manual before operating your phone, and keep it for future reference.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Printed in Korea. Nuance®, VSuite™, T9® Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries. The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered trademarks and are wholly owned by the Bluetooth SIG. microSD™, microSDHC™, and the microSD logo are Trademarks of the SD Card Association.
Table of Contents Section 1: Getting Started ..............................................4 Section 5: Understanding Your Contacts .................... 29 Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Section 8: MetroWEB .................................................... 55 MetroWEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Launching MetroWEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using MetroWEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 15: Health and Safety Information ............... 106 Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 106 Warning Regarding Display . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 107 UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Consumer Information on Wireless Phones . . . . . . . . . . . . . . 108 Road Safety . . . . . . . . . . . . . . . . . . . . . . .
Section 1: Getting Started This section explains how to start using your Samsung SCH-r350 phone by activating your service, setting up your Voicemail, or getting an understanding of how this manual is put together. Understanding this User Manual The chapters of this guide generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 134. Also included is important safety information that you should know before using your phone.
Important!: You must fully charge the battery the first time you use your phone, otherwise you could damage the battery. 1. Insert the top end of the battery first, matching the gold contacts on the inside of the battery to those on the phone. 2. Press lightly on the bottom end of the battery down into the phone until it slips into place. 3. 5 Press lightly down on the middle of the battery cover (1) and upward at the top (2) until the cover locks into place. Remove the Battery 1.
Use the Travel Adapter The travel adapter included with your phone is a convenient, light-weight charger that rapidly charges your phone from any 120/220 VAC outlet. 1. Important!: You must unplug the adapter before removing the battery from the phone during charging to avoid damage. Low battery indicator EL BA C KN IL AT AD Incorrect Plug the large end of the Travel Adapter into a standard 120 VAC or 220 VAC wall outlet.
Turning Your Phone On 1. Press and hold the the display lights. Note: If your phone is on and you press for less than one second, the phone will not power off. This prevents your phone from being turned off accidentally. key until Setting Up Your Voicemail Note: As with any other radio-transmitting device, do not touch the antenna while using your phone as this can affect call quality and can cause the phone to operate at a higher power level than is necessary.
Memory Card (Optional) Your phone has a Memory Card slot on its left side. You can install a microSD™ card to provide additional memory for storing files (such as, sound files and photos) in your phone. Install a Memory Card Note: When you install a microSD or microSDHC Card in your R350 phone, it creates the file folders needed for storing multimedia files. Do not add other file folders or file types to the Memory Card. This slows the phone’s access to files on the Memory Card. Remove a Memory Card 1.
Section 2: Understanding Your Phone This section outlines some key features of your SCH-r350 phone. It also describes the screen format. Side Views of Your Phone 4 Your Phone’s Features • Domestic and international voice and text messaging service (available on participating networks). 1 • Large 2.
2. Camera Key — From Standby mode, lights the front display backlight and launches the Camera feature of your phone. In Camera mode, takes pictures. 3. Power / USB Connector — Used to connect charging accessories or optional USB Data cable to your phone. 4. Headset Connector — Used to connect an optional headset (for hands-free operation and/or music playback) or an optional TTY device. Front View of Your Phone Features 1.
8. 9. Fn Key — Toggles the text input mode to let you use the QWERTY keypad to enter numbers and symbols as well as letters. Shift Key — Toggles capitalization for text input between mixed case (Abc), uppercase (ABC), and lowercase (abc). Capitalization remains as selected until you press the Shift key again. 10. Voice SVC/Sym Key — From Standby mode, press and hold to launch Voice SVC (Service). When entering text, press to launch a Symbols screen for selecting symbols. 11.
Rear View of Your Phone 1 2 5 4. microSD (Memory Card) Slot — Under the Battery Cover — Lets you install and remove optional microSD Memory Card for additional image/photo storage and for music storage. 5. Mirror — Helps you center the camera lens when taking self portraits. Command Keys Soft Keys 3 4 Functions for the soft keys are indicated by labels that appear in the display above each soft key. There are two soft keys, Left ( ) and Right ( ). Left Soft Key Features 1.
OK Key • In Standby mode, press the OK key ( ) to launch the highlighted menu or feature. • In a menu, press to accept the highlighted selection. • In camera mode, press to take a photo. (For more information, refer to “Camera” on page 62.) • In a list, press the OK key ( ) to view a highlighted item. Send Key The Send key ( ) is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed. • When receiving a call, press once to answer the call.
Fn Key Press to start a new line. While in Input Mode, the Fn (Function) key ( ) lets you toggle text input modes between Abc and 123/Sym. Press once to enter a single upper case letter. Press twice to select CAPS LOCK. Press once more to remove CAPS LOCK. While in Standby mode, press and hold the Fn (Function) key ( ) to activate/deactivate Vibrate Mode. Press to pop-up the first of three pages of symbols in which you can select desired symbols.
2. 15 The Info Panel contains the Clock display (showing the time, day, and date) and three icons that indicate how many Missed Calls records, unread Incoming messages, and Voicemail messages you currently have. You can select these icons to access your call records and messages. 3. The fourth line in the display contains additional feature status icons, such as the Automatic Answer icon shown. 4.
• Warning – Example: “Low Battery,” “Memory Full!” Backlights Backlights illuminate the display and the keypad. When you press any key or open the phone, the backlights come on. They go off when no keys are pressed within a period of time set in the Backlight menu. Note: During a phone call, the display backlight dims and turns off after 10 seconds to conserve battery power, regardless of the Backlight setting. (For more information, refer to “Backlight” on page 92.
Call Answer Mode You can choose to answer a call by pressing any key except , , or or by pressing only . (For more information, refer to “Call Settings” on page 94.) Talk Mode You can place and receive calls only when your phone is on. While in a call, your phone is in talk mode and you have the following options available: • You can conduct the call by launching Speakerphone mode. (For more information, refer to “Speakerphone Mode” on page 17.) • To mute your phone’s microphone, press Mute.
Camera Mode Lock Mode Camera mode lets you take pictures with your phone’s camera. In Camera mode, you can also adjust the resolution and appearance of your pictures. When the phone is in Lock Mode, restrictions are placed on phone use. You can receive calls and messages, but cannot place outgoing calls (except for emergency numbers) until you unlock the phone. Lock Mode also restricts access to menus and the Volume key.
Section 3: Call Functions This section provides procedures for making and answering calls. This section also describes features, such as call logs and call timers, that help you make calls and manage your call time. Making a Call 1. With the phone on, enter the number you wish to call using the keypad. 2. Press to place the call.
3. • Wait — A hard pause (waits for input from you). Select the desired pause to enter it into the number sequence. 4. Press to call the number. Tip: Press Save to store pauses along with the number if you plan to call the number frequently. 2. Press and hold the number key representing the second digit of the desired Contact’s speed dial number. Example: To speed dial the Contact assigned speed dial 35, press press and hold .
If the name is recognized, Voice Dial repeats the name and dials the number. Note: End Calls Before relaunching the VoiceSignal voice recognition software — When you use Voice Dialing to make a call, you must end that call before you can use other Voice Commands. See “Voice SVC” on page 58 for more information. Use the Call command to dial any number stored in your Contacts list by saying the name of the contact (Name Dialing).
“Say a command” appears in the display and is pronounced through the speaker. 2. Say “Call”. VoiceSignal prompts you to “Say the name or number.” 3. Speak clearly and say the telephone number of the person you want to call. For example, say “7 8 1 9 7 0 5 2 0 0." If it recognizes the number, Voice Dial repeats it and dials the number.
• Information about the last 90 each of incoming, missed, and outgoing calls are automatically stored to a call log. Set Call Ringer Volume 1. In Standby mode, press the Volume key on the left side of the phone. 2. Press the Volume key up or down to set the call ringer volume as desired. 3. Once you’re satisfied with the setting, press phone returns to Standby mode. . The • Any Key — Pressing any key except , answers a call. • Send Key — Only pressing answers a call. 2.
Call Block You can prevent your number from displaying on another phone’s caller ID screen by enabling Call Block. 1. In Standby mode, press 2. Enter the number you wish to call, then press , , . . Silence an Incoming Ring To temporarily silence the incoming call ringer: 䊳 While your phone is ringing, press the Volume key ( ), on the left side of the phone, up or down. Ignore an Incoming Call Ignored calls are immediately forwarded to Voicemail.
1. 2. 25 In Standby mode, select Menu ( ) ➔ Calls ➔ Outgoing Calls / Incoming Calls / Missed Calls / All Calls. A list of your selected calls appears in the display. Highlight a call. You have the following options: • To call the other party, press . • To compose and send a message to the othe party, press Msg. The Send Message menu appears in the display. (For more information, refer to “Create and Send Text Messages” on page 42 or “Send Picture Messages in Standby mode” on page 45.
• All Calls — Shows the number and total duration of all calls originated by and made to your phone since the last erasure. • Last Reset — Shows the date and time all counters, except Lifetime Calls, were reset. • Lifetime Calls — Shows the duration of all calls on your phone since activation (Lifetime timers cannot be reset). 2. If desired, highlight a particular timer. 3. To reset the highlighted timer, press Reset. To reset all of the timers except Lifetime Calls, press Reset All.
selected calls appears in the display. 2. Highlight the call whose number you wish to store in Contacts. Press Options, then select Save. • To add the number as a Contacts entry, select Create New. • To add the number to an existing Contact, select Update Existing. 4. Follow the prompts to store the number to Contacts. 3.
Section 4: Menu Navigation Using Shortcut Icons This section explains the menu navigation for your phone. Menu Navigation Access the menus and sub-menus in your phone using the Navigation key ( ) and soft keys ( or ), or use a shortcut. 1. In Standby mode, select Menu ( ). The Main Menu (the first of several menus) appears in the display. 2. Use the Navigation key to browse through the menus. 3. Press to enter the menu or sub-menu that appears in the display. 4.
Section 5: Understanding Your Contacts This section details how you can manage your daily contacts by storing their names and numbers in your Contacts list. You can have your Contacts entries sorted by name. Note: Although the procedures in this section are written for the phone keypad, you can also perform these procedures using the QWERTY keypad. – or – Select Menu ( ) ➔ Contacts. The following options appear in the display: • Find — Find a phone number By Name.
• Memory Info — Display used and available memory for Contacts entries. 2. Select the desired option. Tip: You can also press the keypad number key that corresponds to the menu option number. Finding a Contacts Entry Voice Method Use the Voice SVC Lookup command to view contact information for any named contact stored in your Contacts list by saying the name. Note: The Lookup command shows the requested contact information in the display but does not dial any phone numbers for the contact.
1. – Call — Dial the number associated with the name. – Send Name Card Via Bluetooth — Send a copy of a Contacts entry to another Bluetooth device. In Standby mode, press Contacts. The Find screen appears in the display with the Go To field and the first Contacts entry highlighted. Tip: You can also access the Find screen from the Contacts menu by selecting Find. 2. Enter a name as entered in Contacts. (For more information, refer to “Entering Text” on page 14.
The Add New Entry screen appears in the display with the Name field highlighted. 2. Enter the name of the new entry using either keypad. (For more information, refer to “Entering Text” on page 14.) 3. Highlight one of the following fields: 3. Press the Navigation key Up/Down to review the information for the entry that you wish to change, then press EDIT. The Edit Contact screen appears in the display. Highlight the particular information you want to add or change.
Add Pauses to Contacts Numbers Calls to automated systems such as banking services often require a password or account number. Instead of manually entering these numbers, you can store them in a Contacts entry with the phone number and with special characters called pauses, up to a maximum of 32 digits. • 2-Sec Pause — Stops the calling sequence for two seconds, then sends the remaining digits. • Wait — Stops the calling sequence until the phone receives further input.
Assigning a Picture to a Contacts Entry When you assign a picture to a Contacts entry, the picture you assign appears in the display when you receive a call from that Contact. 1. 2. Find the Contacts entry you want to edit. For more information, refer to “Finding a Contacts Entry” on page 30. Highlight the desired Contact, then press Edit. The Edit Contact screen appears in the display. 3.
Saving a Number After a Call number type options: Once you finish a call, you can store the caller’s number to your Contacts list. Note: If the call was incoming and Caller ID information was unavailable, then the Save option is also unavailable. 1. Press to end your call. The call time, length of call, phone number, and name of the party (if available) appear in the display. Press Save.
more information, refer to “Adding a New Contacts Entry” on page 31) until you enter a name for the entry. Note: Number types that are already assigned a number show the number instead of the number type label. 3. Select the desired unassigned number type. The Contacts entry information appears in the display with the new number posted in the appropriate number type field. 4. Press SAVE to save your changes to the existing entry.
page 30.) add to a Group. 2. Highlight the desired entry, then press Edit. – Or – 3. Highlight the number field marked by the Speed Dial icon ( ). 4. Press Options, then select Remove speed dial. “Remove speed dial?” prompts you to confirm your desire to remove the entry. Find a Contacts entry (see “Finding a Contacts Entry” on page 30 for more information) that you want to add to a Group. 5. Press Yes to remove the Speed Dial assignment.
1. From the Contacts menu, select Group. The Group List screen appears in the display showing Groups similar to the following: • No Group • Business • Colleague • Family • Friends 2. Highlight a Group, then press Options. The following options pop-up in the display: • Send Message • Rename • Erase • Add 3. Select Add. The Add Contacts screen appears in the display showing all Contacts entries. 4. Do one of the following: • Highlight a Contacts entry you want to add to the group, then press MARK ( ).
Add a New Group Find the Contacts entry you want to delete. (For more information, refer to “Finding a Contacts Entry” on page 30.) Press New. The New Group screen appears in the display. 2. Enter a new group name using either keypad. (For more information, refer to “Entering Text” on page 14.) Highlight the desired entry, then press Options, and select Erase. The phone prompts you to confirm the erasure. 3. Press Yes to confirm erasure of the selected Contact. Press No to retain the Contact. 1.
2. Search for the Metro411 application. 3. Follow the instructions in your phone’s display. Note: For more information about Metro411 Directory Assistance service, contact your Wireless Provider. Memory Info The Memory Info menu option lets you view the amount of memory you have used to store Contacts entries, as well as the memory remaining to store more Contacts entries. 䊳 From the Contacts menu, select Memory Info.
Section 6: @metro With @metro, you can download full featured applications over the air including games, personalized ring tones, pictures, and more. You can send and receive instant messages and email, or browse the web to catch up on all the latest news. This section outlines how to obtain games and other applications for your phone. For more information, contact your Wireless Provider. Accessing @metro (Mobile Shop) 1.
Section 7: Messages This section explains how to send or receive different types of messages. This section also describes the features and functionality associated with messaging. Note: Although the procedures in this section are written for the phone keypad, you can also perform these procedures using the QWERTY keypad. Types of Messages Your phone is able to send and receive Text, Picture, Email, and Instant messages to compatible phones and devices. Note: Available memory is shared between all messages.
– Priority Level — Choose High or Normal. – Validity Period — Enter the Date when this message will cease to be valid, then use the Left and Right navigation keys to choose the Time. – Delivery Ack — Choose On or Off — Requests confirmation when your message is received. – Add To Contacts — Save the recipient’s number or e-mail address as a Contacts list entry. 5. Once you’re finished entering your message, press Send.
Note: For more information about using the camera feature in your phone, see “Camera” on page 62. 3. Press Send to save the picture and begin delivery process. The Create Pic Msg screen then appears in the display with the Send To: list highlighted. 4. Enter the phone number or e-mail address of the recipient of the Picture message, then press OK. Tip: Press Add to display a pop-up menu containing: Contact, Groups, and Recent Calls.
• Add To Contacts — Save the recipient’s number or e-mail address as a Contacts list entry. Select the desired option. prompted to say a Contact name or a number for the first recipient of the message. 3. 10. Press SEND to send the message. “Pic Msg Sending” appears in the display and a progress bar indicates the send status.
– Press Send. The picture is inserted into your message. Note: For more information about using the camera feature of your phone, see “Camera” on page 62. You are returned to the Create Pic Msg screen with the selected picture in the Picture: field. 8. For a Picture Message, if you wish to insert a sound into your message, highlight the Sound: field, then press Sounds. The My Ringtones screen appears in the display. 9.
The date and time of the message also appear in the display along with the following options: • View Now — Retrieves and opens the message, where you have the option to Reply, Forward, Delete, Save Text, Save Pic, or Save Msg. • View Later — Saves the message to your inbox, where you can view it later, then returns your phone to Standby mode. Select the desired option. View a Picture Message Later 1. In the Messages menu, select Inbox. The Inbox appears in the display. 2. Select the new message.
Email 䊳 In Standby mode, do one of the following: • Select mail@metro ( ). • Press Messages, then select Email. • Select Menu ( ) ➔ Messages ➔ Email. The Email screen appears in the display. IM 䊳 In Standby mode, do one of the following: • Select Mobile IM ( ). • Press Messages, then select IM. • Select Menu ( ) ➔ Messages ➔ IM. The IM screen appears in the display. Message Boxes Your phone stores messages in any one of five message boxes. The subsections that follow describe each message box in detail.
Messages and Lock Mode Your phone can still receive messages while in Lock Mode. The time and date of the message appear in the display, but you cannot access the message until you enter the lock code. Managing Inbox Messages 49 1. In the Messages menu, select Inbox. The Inbox appears in the display showing a list of received messages. 2. Highlight a message in the list. You have the following options: • To remove the highlighted message from the Inbox, press Erase.
Select an option to perform its function. Draft Box Messages in the Draft Box are those that have been composed but never sent. You can return to the Draft Box at any time to view, edit, or send a draft message. View and Edit Draft Text Messages 1. In the Messages menu, select Drafts. A list of any draft messages that you’ve saved appears in the display. 2. Highlight a text message that you wish to view or edit, then press EDIT. The Create Txt Msg screen appears in the display. 3.
5. Select an option to perform its function. 6. When you have completed composing your message, press SEND to send it. View and Edit Draft Pic. Messages 51 1. In the Messages menu, select Drafts. A list of any draft messages that you’ve saved appears in the display. 2. Highlight the picture message that you wish to view, then press EDIT. The Create Pic Msg screen appears in the display. 3. Make any needed changes and press Options.
Voicemail Messages in your voice mailbox are logged in the Voicemail box of the Messages menu. Open the Voicemail box to view the details of the Voicemail message. When you’re notified of a new voicemail message by an alert tone and the new message icon, the following options pop: • Listen Now — Calls your voice mailbox and lets you listen to your messages. • Listen Later — Returns you to Standby mode where you can choose to call your mailbox and review your messages at a later time.
3. To delete the messages, press Yes. To cancel deleting the messages, press No. Message Settings Use the Msg Settings sub-menus to define settings for general, text, and picture messages. General Message Settings 1. 53 In the Messages menu, select Msg Settings ➔ General. The following options appear in the display. • Auto Save — Choose whether your messages are saved automatically when you exit them (On, Off, Prompt).
Text Message Settings In the Messages menu, select Msg Settings ➔ Text Message. The following options appear in the display. • Auto View — On/Off (default) — With Auto View On, the full content of a text message appears in the display as the messages is received. • Signature — Create a signature, which can be included at the bottom of outgoing message text. • Auto Scroll — On/Off — With Auto Scroll On, the full content of a text message automatically rolls upward on the display, one screenfull at a time.
Section 8: MetroWEB This section outlines how to launch MetroWEB, how to navigate to other pages on the web, and how the keys on the QWERTY keypad are used with the web application. Additionally, links to other sites are briefly discussed. MetroWEB With MetroWEB, you can conveniently surf the web and download ringtones and wallpapers using your phone. Each time you launch MetroWEB, your phone connects to the Internet and the service indicator icon ( ) appears in the display.
MetroWEB soft keys At the bottom of the MetroWEB display is a bar that contains browser commands. The Left and Right ( ) soft keys on the keypad are used to execute the commands that appear in their respective corners of the display. These are called “soft keys” because their functions change depending on the application. Using Links Links have several purposes, such as jumping to a different page, to a different site, or even initiating a phone call. Links are shown inside of brackets ([ ]).
Section 9: Loopt® With Loopt, you can locate friends on a map, using GPS technology. Note: Please check with your Wireless Provider for availability of the Loopt application. This section outlines how to launch Loopt. For more information, contact your Wireless Provider. Accessing Loopt 1. In Standby mode, select Loopt ( ). The Loopt screen appears in the display, as shown.
Section 10: Voice SVC This section explains how you can use and customize your phone’s Voice SVC voice recognition feature. Voice SVC Options Your Samsung SCH-r350 includes Nuance Vsuite, state-of-theart voice recognition software that lets you use your voice to dial numbers, access your Contacts list, and open Tools. To access your phone’s voice recognition, do the following: In Standby mode, select Menu ( ) ➔ Tools ➔ Voice SVC.
Voice SVC ➔ Voice Settings. • Go to — Lets you access the following list of your phone’s features and functions: – Contacts – Calls – Messages – MetroWEB – @metro – VoiceSVC – Multimedia – Tools – Settings • Check — Lets you say a single command (such as “Status”) to verify your phone's: Status, Signal, Coverage, Battery, or My phone #. Note: Speaking clearly, say the command that you want to use. If VoiceSignal does not recognize a command, it prompts you to repeat the command.
3. Press to accept the new setting. Press to discard the new setting and return to the Voice Settings menu. Digit Dialing If you regularly have trouble with Vsuite not recognizing the numbers you speak, try adapting digit dialing to your voice. Adapting can improve the accuracy of digit recognition, especially for people with strong regional accents. Note: After you adapt Digit Dial, your phone is customized to your voice, and your voice only.
6. Repeat steps 4 and 5 for another 10 sets of digits. After the second group of 10 sets of digits, “Adaptation complete” plays through the speaker and you are returned to the Digit Dialing menu. Reset Digits To reset digit dialing to factory default settings, do the following: 1. From the Voice Settings menu, select Digit Dialing ➔ Reset Digits. The phone prompts you to confirm digit rest. 2. To reset your digit adaptation, press OK. To cancel, press Back.
Section 11: Camera Use your Samsung SCH-r350 phone to take full color digital pictures, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera. This section explains how you can do the following: • Take pictures with your phone’s built-in digital camera. • Send and receive pictures taken with your phone’s camera.
• Mosaic Shot — Lets you take a mosaic photo that combines multiple shots. Choose 2X2 for 4 shots, or 3x3 for 9 shots. • Fun Frames — Lets you temporarily apply one of the preloaded picture frames in your phone to characterize or enhance one or more pictures. When you select Series Shot, the Series progress bar ( ) appears in the display. Tip: You can change a number of the camera’s settings to suit particular uses for your pictures. For more information, refer to “Camera Options” on page 66.
The photo review screen appears in the display. 3. Press Send. The Create Pic Msg screen appears in the display. 4. Enter or add the recipient(s) phone number(s) or e-mail address(es). (For more information, refer to “Send Picture Messages in Camera Mode” on page 43.) 5. To save the address(es), press OK. 6. Select other message fields as needed. (For more information, refer to “Send Picture Messages in Camera Mode” on page 43, and see “Send Picture Messages in Standby mode” on page 45.) 7.
Shooting Mode (Mosaic) — Combines 4 or 9 pictures into one image, depending upon the Mosaic setting you select. Shooting Mode (Fun Frame) — Adds a selected colorful frame to your next picture. Size — Indicates the current camera resolution setting. (For more information, refer to “Size” on page 66.) Quality — Indicates camera’s picture quality setting. [You can change the picture quality setting. (For more information, refer to “Quality” on page 66.
For a detailed procedure, see “Send Picture Messages in Camera Mode” on page 43. • Discard the picture by pressing Erase. Camera Options The Camera Option buttons let you adjust the default camera settings to suite available lighting, the subject of the photo, or the purpose of the photo. Shooting Mode Shooting Mode lets you select Fun Frames and/or take multiple pictures in succession when you press the Camera key ( ). In camera mode, press Options, then highlight / / / .
• SuperFine • Fine • Normal 2. Select the quality setting of your choice. You’re returned to the camera viewfinder screen. White Balance White Balance allows you to adjust picture quality according to available light. In camera mode, press Options, then highlight / / / / . The following options appear in the display: • Auto — The camera automatically adjusts color balance to available light. • Sunny — Use this setting when taking photos in full sun.
When you press the Camera key ( ), the countdown timer indicates the time remaining before the camera takes the picture. Tip: To stop or disable the Self Timer without resetting it, press . Change the look of your pictures with Color Effects. Choose from six available settings such as Green, Negative, and Sepia. The selected color effect previews in the display before you take the picture.
Icon Display View Mode lets you quickly add or remove elements of the Camera viewfinder screen. In camera mode, press Options, then highlight ( ) and select Icon Display. The following options appear in the display: • Display All — All Camera display icons appear in the Camera viewfinder screen. • Guideline — Removes the Camera display icons (if displayed) and displays a crosshatch pattern in the Camera viewfinder screen. Camera display icons appear when you press Options.
2. 3. To zoom in, press the Navigation key Up. To zoom out, press the Navigation key Down. (The screen image lightens or darkens to show the affects of your changes). The next time you press the Camera key ( ), the Camera takes the picture, using to your selected Zoom setting. The Photo Gallery Saved pictures are stored in the My Images folder. You can browse the pictures one at a time (expanded mode), or view several pictures at once in thumbnail format. 1.
• View by Location — Lets you elect to view All pictures or only those pictures stored in Phone Memory or Card Memory. • Rename — Change the name of the picture file. • Lock / Unlock — Prevent/allow erasure of the currently highlighted or displayed image. • Slide Show — View all pictures in automatic sequence. • Image Info — View the Name, Date and Time created, Resolution, and Size of the currently highlighted or displayed image. 5.
Section 12: Multimedia Use your Samsung SCH-r350 phone to take full color digital pictures, display them on your phone’s vivid color display, and instantly share them with family and friends. With @metro, you can download personalized ringtones, pictures, and more. (For more information, contact your Wireless Provider.) Note: Although the procedures in this section are written for the phone keypad, you can also perform these procedures using the QWERTY keypad. 2.
• To expand the highlighted image to fill the screen, press VIEW. • For more options, press Options. The following options appear in the display: – Send — Send image as part of a Picture message. (See “Send Picture Messages in Standby mode” on page 45 for more information.) – Set As — Assign the currently highlighted or displayed image as the Main Wallpaper or as the Picture ID for a Contact. – Erase — Delete one or more marked images from the My Images folder.
Highlight a music file, then: • To play the file, press Play. • To select the file for playing or other options, press MARK. • For more options, press Options: – Mark All — Marks all listed music files for playing, removal, or assignment of player settings. – Erase — Deletes highlighted or marked music file(s) from the Memory Card. – Add to Playlist — Lets you add a marked music file to an existing playlist.
• Navigation key: – To pause/resume playing a music file, press . – To stop playing a music file, press the Navigation key Down. – To skip play to an earlier music file in the selected list, press the Navigation key Left. – To skip play to a later music file in the selected list, press the Navigation key Right. – To return to the selected list and choose another music file to play, press the Navigation key Up. • Library soft key — Returns you to the Library screen.
4. Check that the PC Connection setting is set to USB Mass Storage. (For more information, refer to “PC Connection” on page 102.) 5. Connect the USB end of the USB Data Cable to a matching connector on your personal computer. A new “Removable Disk” window should open on your computer screen. 6. Select the Open folder to view files option. A new Windows® Explorer window should open on your computer screen. 7. Drag or download music (MP3) files into the “My_Music” folder.
Erase — To erase the selected voice memo file. Rename — Change the name of the voice memo file. Ringtone Info — Shows the title, size, type, and date for the file. Send via Bluetooth — Sends a copy of this file to another device over a Bluetooth connection. (For more information, refer to “Bluetooth” on page 78.) – Send Pic Msg — Send to someone as part of a Picture message. (See “Send Picture Messages in Standby mode” on page 45 for more information.
Section 13: Tools This section explains how you can use your phone’s Personal Information Manager (PIM) functions to view today’s calendar, schedule appointments, set an alarm, perform simple math calculations, and more. Accessing Your Phone’s Tools To launch the Tools menu: 䊳 In Standby mode, select Menu ( menu appears in the display. ) ➔ Tools. The Tools Bluetooth Turn Bluetooth On/Off When the Bluetooth is turned on, you can use the Bluetooth features available.
Add New Device 7. Press PAIR ( ) to pair the selected device with the phone. You are prompted to enter the passkey or PIN for the selected device. 8. Enter the device passkey or PIN and press . Pop-up messages appear to inform you that pairing with the device is complete and prompting you to connect with the device. 9. To connect with the device, press Yes. To return to the Bluetooth menu without connecting to the device, press No.
Disconnecting from a Bluetooth Device 䊳 From the Registered List, highlight the device and press Off. Managing Your Registered List From the Registered List, highlight a device and press Options. The following options appear in the display: • Remove Device — Deletes the device from the Registered List. • Rename Device — Lets you change or replace the device name, as needed.
View an Event 81 1. From the Calendar menu, select Calendar. A calendar appears in the display with the current date highlighted. The month and year appear at the top of the display. 2. Use the following options and navigation keys to move around within the calendar: • To move to an individual day, one day or one week at a time, press the Navigation keys or Arrow keys. • To view previous months, press the Up volume key. • To view future months, press the Down volume key.
Press Add. The New Event screen appears in the display. • Use the Up and Down navigation keys to highlight New Event options. • Use the Left and Right navigation keys to select option values. • Use the keypad to enter option values. 3. Enter the Name of the new event using the keypad. 2. (For more information, refer to “Entering Text” on page 14.) Note: The current mode of text entry is indicated in the lower left corner of the display. 4.
– Press Options to Erase the memo you are viewing, Add a New Memo, or Lock/Unlock the memo you are viewing. If you have any stored memos, they appear as a list in the display. 2. If you don’t have any stored memos, press Add to add a memo. 3. Enter memo text using the keypad. (For more information, refer to “Entering Text” on page 14.) Tip: The current mode of text entry is indicated in the lower right corner of the display. 4. When you’re finished entering details for the memo, press OK ( ).
• Select the alarm clock you wish to set, then press EDIT. The selected Set Alarm screen appears in the display. 2. Press the Navigation key Up/Down to highlight Set Alarm options. 3. Press the Navigation key Left/Right to set the alarm On. To set the Time: • Enter the time for the alarm using the keypad. • Press the Navigation key Left/Right to select AM or PM. 5. Press the Navigation key Left/Right to select the Frequency at which you wish the alarm to occur (Daily, Mon.-Fri., Weekends, or Once). 4.
World Time World Time lets you view the time of day or night in any of the 24 different time zones around the world. Note: To use World Time, you need to subscribe to your Wireless Provider’s digital service. 䊳 From the Tools menu, select World Time. A world map appears in the display, showing the time and date in a home zone and one other city or time zone. Selecting/Displaying Time Zones • Press Options and select Go to City for a list of city names in alphabetical order. .
2. You have the following options: • To enable Daylight Saving Time for the US time zones, press DST On. • To set the displayed time zone as the default time zone for the second World Time clock, press OK. • To set the displayed time zone as the default time zone for your phone, press Options, then select Set as home zone. • To return to the Tools menu without changing the default time zone, press .
2. To start, stop, and resume the Stop Watch count, press . 3. At the start of each succeeding event/lap, press Record to record the completion time for the previous event/lap. You can record up to eight event/lap times. 4. To reset the Stop Watch and to erase all stop watch (lap) times recorded, press Reset. • Volume • Area • Temperature 2. Select the conversion feature you wish to use. 3. Use the Navigation key to select the units to be converted From and To. 4.
4. Highlight a currency whose exchange rate you wish to change. 5. Use the keypad keys to change the selected exchange rate value. 6. To save the changed exchange rate, press OK ( ). The Exchange Rate list appears in the display. 7. To change any other exchange rates, repeat Steps 3 – 6. 8. To return to the Converter screen, press 4. To select the Base currency to be converted from, press the Navigation key Left/Right. 5.
Currency — Erasing Exchange Rates 1. From the Tools menu, select Tip Calculator. The Tip Calculator screen appears in screen, with the Bill field highlighted. 2. Use the keypad to enter the total amount of the bill. 3. If needed, highlight the Tip field, and enter a tip percentage. 4. If needed, scroll down to highlight the # Paying field, and enter the number of persons paying. 5. The amount of the Tip, the final Total, and the amount for each person appear in the lower half of the screen.
Section 14: Changing Your Settings This section explains how to configure your phone’s language, network preferences, security options, and other settings. Accessing Your Phone’s Settings 䊳 In Standby mode, select Menu ( ) ➔ Settings. The Settings menu appears in the display. Location Setting You can set your phone to pass Global Positioning System (GPS) data to identify your location to the network continually or only when you make an emergency (911) call.
Info Panel The following clock format options appear in the display: Lets you display or hide a pop-up panel that shows the Day, Date, Time, and the numbers of Missed Calls, new Messages, and new Voicemail. These numbers also serve as shortcuts for accessing the Missed Calls log, the Messages Inbox folder, and the Voicemail folder. From the Display Settings menu, select Info Panel. The following options appear: • On — The Info Panel appears in the Standby screen.
Dialing Font Size Lets you select the font size used to display numbers you dial. From the Settings menu, select Display Settings ➔ Dialing Font Size. The following Size options appear in the display: • Normal • Large 2. Select the preferred Dialing Font Size. 1. Banner Lets you change or replace the Banner text that appears in the display when your phone is in Standby mode. Also lets you enable/disable an ERI (Extended Roaming Indicator) banner. From the Settings menu, select Display Settings ➔ Banner.
2. Select the desired sub-menu. 3. Use the Navigation key to change settings as desired in the selected sub-menu, and press to save your selection. Shortcut Icon Master Volume You can set the master volume setting on your phone. This setting if for all sounds other than the ring tones. 1. Shortcut Icon lets you display or hide a list of icons that serve as shortcuts for launching applications on your Tint™.
– Picture Message – Voicemail 2. 3. • Roam Ringer Select a ringer type. The My Ringtones screen appears in the display listing ringtone, melody, and recorded sound files. Select the desired ringtone, melody, or sound file. Tip: To play each tone, melody, or sound file as you scroll through the list, press Play. Alerts You can set your phone to sound an alert whenever you enter or leave your service area, connect or disconnect a call, and other options. 1. From the Sound Settings menu, select Alerts.
Call Answer You can select a specific answer mode when you receive an incoming call. Your phone can be preset to answer when you do any of the following: From the Call Settings menu, select Call Answer. The following call answer options appear in the display: • Any Key — Pressing any key except , , or answers a call. • Send Key — Only pressing answers a call. 2. Select the desired option. 1. Call Alert Call Alert lets you select what sounds your phone plays to notify you of incoming calls.
TTY Mode Your phone is fully Teletypewriter (TTY)/ Telecommunication Device for the Deaf (TDD) compatible. You connect TTY/TDD equipment to the headset connector on the top of your phone. • TTY + Talk — Enables TTY mode while letting you speak with the other party. • TTY + Hear — Enables TTY mode while letting you hear the other party. • TTY Off — Disables TTY mode. Note: The TTY Mode option has no effect on the phone’s earpiece, microphone, or speaker.
Phone Settings 䊳 From the Settings menu, select Phone Settings. The following menus appear in the display: Airplane Mode When set to On, Airplane Mode disables all radio functions of your phone. This prevents you from making or receiving calls, but allows you to use other features (such as the camera and the Tools) safely in sensitive environments, such as on board an aircraft. 1. From the Phone Settings menu, select Airplane Mode.
Lock Phone Locking the phone blocks all outgoing calls except those to 911 and to the three user-programmed emergency numbers. You can lock the phone manually, or set the phone to lock automatically when turned on. In Lock mode, you can answer calls, but you must unlock the phone to place calls (except to emergency and secret numbers). Important!: If you change the NAM1 setting after setting the phone to lock upon power-up and did not program a number into NAM2, you won’t be able to access your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency prompt appears in the display for the duration of the call. Important!: Because of various transmission methods, network parameters, and user settings used to complete a call from your wireless phone, a connection cannot always be guaranteed.
2. To empty your Contacts list, press Yes. To keep the current Contacts entries, press No. Restrictions Restrictions let you restrict the use of your phone for outgoing calls/messages/data, incoming calls/messages/data, and calls/ messages placed by/to your Contacts. From the Security menu, select Restrictions. The following options appear in the display: • Calls • SMS Messages (Text messages) • MMS Messages (Picture messages) • Data 2.
2. Select the desired Roam setting. 5. The Phone Settings menu appears in the display. Set Time Use the Set Time option to set the current time and date. Note: In digital service mode, the Set Time feature is disabled. The network adjusts time and date automatically. With Airplane Mode set to On, the Set Time feature is enabled. From the Phone Settings menu, select Set Time. The following options appear in the display: • Set Time • Set Date 2. Select Set Time. The Set Time screen appears in the display.
following Navigation key options appear in the display: • Up Key 2. • Right Key • Down Key • Left Key • @metro • My Images • World Time • MetroWEB • Music Player • Calculator • Messages • My Ringtones • Stop Watch • Inbox • Calendar • Converter • Contacts • Memo Pad • Voice Recording • Recent Calls • Alarm Clock • Tip Calculator Select the desired function. You can now press the selected Navigation key in standby mode to launch the selected function.
2. Select the desired setting. Auto Key Lock With Auto Key Lock set to On, your phone automatically disables its keys when the screen backlight goes out. From the Phone Settings menu, select Auto Key Lock. The following settings appear in the display: • On • Off 2. Select the desired option. 1. To unlock the keys: 1. Press Unlock. “Press space to unlock” pops-up in the display. 2. Press .
• Mark individual files by highlighting each file, then pressing MARK ( ); or mark all files by pressing Mark All. • Press Done. You are prompted to confirm the erasure(s)/move(s). – To erase/move/copy the selected file(s), press Yes. – To keep the selected file(s), press No. 3. Card Memory 1. From the Memory Info menu, select Card Memory. The following options appear in the display: • Memory Usage — Shows Total phone memory, total memory Available, and memory quantities used to store Images and Music.
4. To return to the Card Memory menu without formatting the Memory Card, press No. Phone Info Phone Info lets you identify the hardware and software versions of your phone and to identify the phone number assigned to your phone. Phone Number 2. From the Settings menu, select Phone Info ➔ Phone Number. The phone number assigned by your Wireless Provider appears in the display. Press OK ( ) to return to the Phone Info menu. Icon Glossary From the Settings menu, select Phone Info ➔ Icon Glossary.
Section 15: Health and Safety Information This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone. Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.
contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: • Head: 1.21 W/Kg. • Body-worn: 0.775 W/Kg.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION. Consumer Information on Wireless Phones The U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones.
that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.
the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.
that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations.
They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that handsfree kits reduce risks.
defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI.
1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road. 2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today. 3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road.
"The wireless industry reminds you to use your phone safely when driving." studies with tinnitus (a ringing in the ear), hypersensitivity to sound and distorted hearing. For more information, please call 1-888-901-SAFE, or visit our web-site www.ctia.org. Individual susceptibility to noise-induced hearing loss and potential hearing problem varies.
• Avoid using headphones after exposure to extremely loud noises, such as rock concerts, that might cause temporary hearing loss. Temporary hearing loss might cause unsafe volumes to sound normal. • Do not listen at any volume that causes you discomfort. If you experience ringing in your ears, hear muffled speech or experience any temporary hearing difficulty after listening to your portable audio device, discontinue use and consult your doctor.
Operating Environment Remember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.
The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities. While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.
using their hearing aid with the particular wireless phone. "Normal usage" in this context is defined as a signal quality that is acceptable for normal operation. The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules.
Emergency Calls This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example). Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength.
• Check regularly that all wireless phone equipment in your vehicle is NFPA (National Fire Protection Agency) 1 Batterymarch Park Quincy, Massachusetts USA 02169-7471 Internet: http://www.nfpa.org Cautions Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment, and void your authority to operate this equipment. Only use approved batteries, antennas and chargers.
Understanding the Power Save Feature If your phone is unable to find a signal after searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key. Anytime the Power Save feature is activated, a message displays on the screen. When a signal is found, your phone returns to standby mode. Understanding How Your Phone Operates Your phone is basically a radio transmitter and receiver.
temperature, features selected, frequency of calls, and voice, data, and other application usage patterns. Battery Precautions • Avoid dropping the cell phone. Dropping it, especially on a hard surface, can potentially cause damage to the phone and battery. If you suspect damage to the phone or battery, take it to a service center for inspection. • Never use any charger or battery that is damaged in any way. • Do not modify or remanufacture the battery as this could result in serious safety hazards.
• Do not get your phone or battery wet. Even though they will dry and appear to operate normally, the circuitry could slowly corrode and pose a safety hazard. • Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag.
• If your phone is equipped with an external antenna, use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices. • If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.
Section 16: Warranty Information Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date: Phone 1 Year Batteries 1 Year Leather Case 90 Days Hols
facility in an adequate container for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
End User License Agreement for Software IMPORTANT. READ CAREFULLY: This End User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Samsung Electronics Co., Ltd. for software owned by Samsung Electronics Co., Ltd. and its affiliated companies and its third party suppliers and licensors that accompanies this EULA, which includes computer software and may include associated media, printed materials, "online" or electronic documentation ("Software").
5. UPGRADES. This EULA applies to updates, supplements and add-on components (if any) of the Software that Samsung may provide to you or make available to you after the date you obtain your initial copy of the Software, unless we provide other terms along with such upgrade. To use Software identified as an upgrade, you must first be licensed for the Software identified by Samsung as eligible for the upgrade.
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
13. APPLICABLE LAW. This EULA is governed by the laws of TEXAS, without regard to conflicts of laws principles. This EULA shall not be governed by the UN Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded. If a dispute, controversy or difference is not amicably settled, it shall be finally resolved by arbitration in Seoul, Korea in accordance with the Arbitration Rules of the Korean Commercial Arbitration Board.
Phone: 1-888-987-HELP (4357) ©2009 Samsung Telecommunications America. All rights reserved. No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice.
Index Numerics 2-Sec Pause 33 A Accessing Your Phone’s Settings 90 Accessing Your Phone’s Tools 78 Adding a New Contacts Entry Dial Method 31 Menu Method 31 Adjust Key Tone 94 Alarm Clock When an Alarm Sounds 84 Alarm clock Turn Off the Alarm 84 Alerts 94 Auto Answer 95 Auto Retry 95 B Backlight 92 Banner 92 Battery 4 Charging 5 Low Battery Indicator 6 Removal 5 Travel Adapter 6 C Calculator 86 Calendar View an Event 81 Call Answer 23 95 Call Block 24 Call Functions Answering a Call 22 Making a Call 19
Edit Name and Numbers 32 Editing 32 Erase All 99 Finding 30 Groups 37 Memory Info 40 Metro411 39 Opening 29 Saving Call Numbers 35 Speed Dial 36 Create Messages 42 D Data Counter 26 Data, View Counters 26 Display 90 Display Settings Backlight 92 Banner 92 Wallpaper 90 Draft Folder 50 Draft Messages 50 E Edit Contacts Name and Numbers 32 Emergency 99 Emergency #s in Lock Mode 99 135 Emergency Numbers 98 Entering Text 14 Erase All Entry 99 Erase Logs 25 Erase Messages 52 Exit metroWeb 55 G Gallery Image 7
Voicemail 52 Message folder outbox 49 Message Folders Erase Messages 52 Message Settings, General 53 Messages Creating 42 Receive in Call 43 Types of Messages 42 Messages and Lock Mode 49 Metro411 39 metroWeb How metroWeb Keys Work 56 Launching metroWeb 55 Using Links 56 Using metroWeb 55 microSD Installing 8 Removing 8 Mobile Shop Shopping and Downloading 41 Mode Call Answer 17 Camera 18 Hands-free 17 Lock 18 Speakerphone 17 Standby 16 Text Input 18 M-Ratings 118 Msg Setting Sub Menu 53 N Notes and Tips
Return to Last Menu 28 Ringer Type 93 S SAR values 106 Save a Number After a Call 35 Save Pictures 65 Screen Layouts 64 Security Settings Change Lock 98 Emergency # 98 Erase All Entries 99 Lock Phone 98 Reset Phone 99 Restriction 100 Security Sub Menu 97 Settings Auto Answer 95 Auto Retry 95 Backlight 92 Banner 92 Call Answer 95 Display, Clock Format 91 Display, Theme 91 Language 97 Location Setting 90 137 Memory Info 103 Ringer Type 93 TTY Mode 96 Voice Privacy 96 Wallpaper 90 Settings Menu Accessing 90
V Version 105 View an Event, Calendar 81 Voice Privacy 96 Voice Setting About VoiceSignal 61 Choice Lists 59 Sensitivity 59 Sound 61 Voice Launch 61 Voicemail Checking 52 Folder 52 Listening to 7 W Wait 33 Wallpaper 90 Warranty Information 126 World Time 85 138
