Samsung My ShotTM ( S C H - r 4 3 0 P O R T A B L E M O B I L E S e r i e s ) T R I - B A N D P H O N E User Manual Please read this manual before operating your phone, and keep it for future reference.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Printed in Korea. Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390. T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending. Openwave® is a registered Trademark of Openwave, Inc. RSA® is a registered Trademark RSA Security, Inc.
Table of Contents Section 1: Getting Started .............................................. 4 Navigate Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . .
Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Section 8: Browser ....................................................... 56 Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Launching Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 107 UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Consumer Information on Wireless Phones . . . . . . . . . . . . . . 108 Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 1: Getting Started This section explains how to start using your SCH-r430 phone by activating your service, setting up your Voicemail, or getting an understanding of how this manual is put together. Understanding this User Manual The chapters of this guide generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 129. Also included is important safety information that you should know before using your phone.
If you continue to use your phone without charging its battery, the phone will shut down. Activating Your Phone Contact your Wireless Carrier and follow their instructions for obtaining service, if necessary. We suggest that you read this guide to fully understand the services your phone supports. Correct Incorrect 2.
3. Turn Your Phone On Place the battery cover over the battery and slide the battery cover into 1. 3 shown. place. 2. Press and hold 2. Press down on the Press . Note: As with any other radio-transmitting device, do not touch the antenna while using your phone as this can affect call quality and can cause the phone to operate at a higher power level than is necessary. Remove the Battery 1. Open the flip on your phone, as to turn off the phone (if on). battery cover release 3.
Turn Your Phone Off 䊳 Press and hold 2. for two or more seconds. Your phone powers off. Note: If your phone is on and you press for less than one second, the phone will not power off. This prevents your phone from being turned off accidentally. Setting Up Your Voicemail Voicemail allows callers to leave voice messages, which can be retrieved any time.
Section 2: Understanding Your Phone This section outlines some key features of your phone. It also describes the screen format and the icons that will be displayed when the phone is in use. Closed View of Your Phone Features of Your Phone • Domestic and international voice and text messaging service (available on participating networks).
With an incoming call, mutes the ringer. In standby mode (with the flip closed), enables the backlight for the Front Display (shows the time and phone status icons). 2. Power/Accessory Connector — Lets you connect a travel adaptor or optional accessories (such as, a headset or a handsfree car kit) to your phone. 3. Camera Lens — The lens of your phone’s built-in Camera. 4. Front Display — Shows time, date, and phone status icons. 5. Camera Key — Launches the Camera feature in your phone.
Features 1. including numbers dialed, feature and function screens, status icons, message indicators, signal strength, and so on. 2. 3. 4. 5. 6. Voice Recognition Key — In Idle mode, pressing and holding this key launches VoiceSignal options. 9. Alpha-numeric Keys — Use these keys to enter numbers, letters, and characters. 10. BACK Key — Deletes characters from the display when Navigation Key — In Menu mode, lets you scroll through you are in text entry mode.
Command Keys Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the Left soft key ( ) and the Right soft key ( ). Left Soft Key Some functions of the Left soft key are as follows. • In standby mode, press the Settings (left) soft key ( ) to open the Settings menu. • When the left soft key function is Edit, press Edit ( ) to edit a Contact. Right Soft Key Some functions of the Right soft key are as follows.
Understanding the Display Screen SEND Key The SEND key ( ) is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed. 1. Press 2. Enter a number and briefly press 3. Briefly press 1. Press once to answer calls. that indicate network status, battery power, to make a call. Press 2 signal strength, connection in standby mode to display a list of type, and more. twice in standby mode to call the most recent 2.
Display Screen Icons Your SCH-r430 phone can show you definitions of the icons that appear on the top lines of the front and main displays. To access the Icon Glossary: 䊳 In idle mode, press MENU ➔ Settings ➔ Phone Info ➔ Icon Glossary. A list shows of the icons that can appear on the top lines of the displays. External Display Your phone has an external display on the outside of the flip. When you close the phone, the external display shows a digital or analog clock.
Your Phone’s Modes Call Answer Mode You can select how you wish to answer a call. 1. In standby mode, press the MENU ➔ Settings ➔ Call Settings ➔ Call Answer. The following call answer options appear in the display: • Any Key — Pressing any key except or answers a call. • Send Key — Only pressing answers a call. • Flip Open — Opening the phone’s flip or pressing answers a call. 2. Use the navigation keys to highlight an option. 3. Press the key to select the method for answering calls.
Receive Messages in Standby Mode The Volume key is on the upper left side of phone, near the You can receive messages in standby mode. An alert tone sounds and a notification message appears in the display when a new message arrives. The following call message options appear: • View Now — Lets you view the message now. • View Later — Lets you view the message at a later time. Talk Mode You can place and receive calls only when your phone is on. While in a call your phone is in talk mode.
Camera Mode Camera mode lets you activate your phone’s camera to take pictures. In Camera mode, you can also adjust the resolution and appearance of your pictures. (For more information, refer to “Multimedia” on page 70.) • Entering Camera Mode — In standby mode, press and hold the Camera key ( ) on the upper right side of your phone. • Exiting Camera Mode — Press the key.
Section 3: Call Functions This section explains how to make or answer a call. This section also includes the features and functionality associated with making or answering a call. Making a Call — Number Entry Dialing 1. With the phone on, enter the number you wish to call using the keypad. 2. Press Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or emergency communications. to place the call.
Making a Call — Speed Dialing Manual Pause Calling When you call automated systems (like banking services), you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses. • 2-Sec Pause — A two-second pause stops the calling sequence for two seconds and then automatically sends the remaining digits.
Three-Touch Dialing Memory locations 100 through 999 are special Three-Touch dialing locations. Example: For Speed Dial number 113, briefly press , briefly press again, then press and hold until the name and number appear in the display and the number is dialed. Pause Dialing From a Contacts Entry • If you speed dial a contact that contains (two-second) 2-Sec Pause(s) simply wait for the pauses to pass and the dialing to complete.
2. “Say a Command” appears in the display and is If the recognized name has multiple numbers stored for it pronounced through the earpiece. (that is, Home, Work, Mobile, and so on), Voice Dial Say, “Call”. displays the possible choices and prompts you with “Which number?” You are prompted to “Say the name or #”. 3. Speak clearly and say the name of a person in your 5. • “Home” • “Work” • “Mobile” Voice Dial dials the specified number. Contacts list, first name followed by last name.
If it recognizes the number, Voice Dial repeats and dials the number. If Voice Dial is not sure it has recognized the number, it displays a choice list of up to three numbers and prompts you with “Did you say?” followed by the first number on the list. 4. Say “Yes” to confirm the number or “No” to hear the next one, or use the keypad to select the correct number from the list. (For more information, refer to “Choice Lists” on page 87.) • Press Repeat ( ) to say the name again.
Ignoring a Call • Press When you ignore an incoming call, the call is immediately forwarded to your voice mail. 䊳 During an incoming call, press Ignore ( ). The caller is forwarded to your voice mail. Adjusting the Call Volume In standby mode, repeatedly press the volume key ( ) down until the Call Volume Level desired appears in the display. The volume key is on the left side of phone. Calls Log The Calls log retains information about Outgoing, Incoming, and Missed calls.
• Details — Calls to Contacts Only — Shows the entry for the called Contact. • Erase — Erase the selected call from your Outgoing call log. • Lock/Unlock — Protect the selected call from being erased. • Erase All — Erase all calls from your Outgoing call log. • View Timer — Shows the number of calls and/or the total time spent on the Last Call, Home Outgoing, Home Incoming, Roaming Calls, All Calls, Last Reset, and Lifetime Calls. 4. Press Msg ( ). The following options appear in the 1.
• Picture Message — Lets you send a picture message to the selected calling number. Note: For more information, refer to “Creating and Sending New Messages” on page 45. 5. Use the navigation keys to highlight an option. 6. Press the key to perform the highlighted option’s function. • Details — Calls from Contacts Only — Shows the entry for the calling Contact. • Erase — Erase the selected call from your Missed call log. • Lock/Unlock — Protect the selected call from being erased.
1. 2. In standby mode, press MENU ➔ Recent Calls ➔ 5. Use the navigation keys to highlight an option. All Calls. A list of all logged calls appears in the display. 6. Press the Use the navigation keys to highlight a call, then press to view further information about the call. 3. Press Options ( ). A pop-up menu containing the following options appears in the display: • Save — Save the number to your Contacts. • Details — Calls from Contacts Only — Shows the entry for the calling/called Contact.
2. Press the Reset ( ) to reset a selected counter except Last Reset and Lifetime Calls. 3. Press the Reset All ( ) to reset all counters except Lifetime Calls. 4. Press or if you wish to exit the list. Note: Although Total call timers can be erased, the Lifetime call timer can never be erased. • Total — View the total amount of data sent or received by your phone since the last reset. • Last Reset — View the time and date all timers were last reset.
Note: Some features may be unavailable while roaming. Roaming also consumes additional power from the battery requiring more frequent recharging. Contact your Wireless Provider for more information about Roaming. How Roaming Works Roam Option lets you set roaming preferences if you move in and out of your home network. The following roaming options are available: • Home only — Your phone is available for normal operation only in the designated coverage area.
Section 4: Menu Navigation This section explains the menu navigation for your phone. It also includes an outline of the menus available with your phone. Messages Menu Navigation Access menus using the MENU key ( soft keys ( ), or a shortcut. 1. In standby mode, press MENU ( ), the Navigation key, the ). The Main Menu appears in the display. 2. Use the Navigation key to browse phone menus. 3. Press Games & Apps Multimedia The In-Use Options Access numerous menus and features even while in a call.
• Voice Privacy — When set to Enhanced, the phone sounds an audible beep when you loose privacy (encryption) on a CDMA connection. For this option to work correctly, you must have the Enhanced privacy option enabled in the Security settings. (This option is enabled by default.) • Location — Lets you set location identification function for continuous operation or to operate only in the event that you dial 911. • Speaker On — Places the phone in speakerphone mode, for hands-free calling.
Section 5: Entering Text This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the amount of key strokes associated with entering text. Text Entry Modes You can compose text messages using alphabetical characters, symbols, and numbers. Each method of character entry (symbol, number, and so on) is called a text entry mode.
2. Press the key repeatedly until the desired character appears in the display (such as, pressing 2. two times desired word, review the word appearing in the text entry for “H”). 3. 4. When you have completed pressing all the keys for the field. Pause briefly and the displayed character is accepted and 3. If the word in the text entry field is not the one you meant inserted into your message. to enter, repeatedly press Press appears. to enter a space.
Tip: To enter words not likely to be in the T9 Word dictionary, such as uncommon abbreviations or slang, try changing the text entry mode from T9 Word to Abc or ABC. 䊳 Entering Upper and Lower Case Letters While in T9 Word or Abc mode, repeatedly press to change the capitalization setting. The left soft key label changes to indicate the current message. Entering Symbols Symbol mode enables you to enter symbols such as @ or % in a text message. 1. new text message.
4. Use the Up and Down navigation keys to highlight Symbols, then press . The first of three screens of symbols appears in the display. 5. Use Prev ( ) and Next ( ) to page through the other symbols, if necessary. 6. Press the key that corresponds with the symbol that you wish to enter. For example, press for an exclamation point (!). Note: You can also use the navigation keys to highlight the desired symbol and then press to enter the selected symbol into your message. 7.
Section 6: Understanding Your Contacts This section explains how to manage your daily contacts by storing their name and number in your Contacts. Contacts entries can be sorted by name. • Group — Rename one of your five Contacts groups. • Memory Info — View available memory for dial entries. 2.
4. Enter a phone number (Mobile, Home, or Work,) or an email address (E-Mail) for the new Contacts entry. 5. If desired, assign the new Contact to a Group. This lets you Note: If the call was incoming and Caller ID information was unavailable, then the Save option is also unavailable. 1. send messages to and find this Contact and other related available) appear in the display. page 39.) 2. If desired, select a unique Ringtone to identify this new 8.
4. Use the navigation keys to highlight the number type that matches your new entry and press 8. . The Add New appropriate unassigned number type, then press Entry screen appears in the display with the number being save populating the selected number type field. (For more 9. Entry” on page 39..) Adding the number to an existing Contacts entry: 10. Press SAVE ( Use the navigation keys to highlight Update Existing, then .
4. Press Options ( ). The following options appear in the display: • Save — Saves the selected number to your Contacts list. • Details — Calls to Contacts Only — Shows the entry for the called Contact. • Erase — Deletes the selected number from the selected Calls log. • Lock / Unlock — Prevents/allows deletion of the selected number. • Erase All — Deletes all numbers from the selected Calls log.
5. • To exit VoiceSignal without dialing, press or . The contact information for the name you selected appears Note: As you enter letters, the entry names of the closest matches (thus far) appear in the display. in the display. Keypad Methods Find by Name If you have stored a named contact in your Contacts list, Find and Quick Search let you locate the entry quickly. 1. In standby mode, do one of the following: • Press Contacts ( ). • Press MENU ➔ Contacts ➔ Find.
Group Search by Number This option lets you find a Contacts list entry with a specific Group name. 1. 2. In standby mode, press MENU ➔ Contacts ➔ Group. The This option lets you find a Contacts list entry by one of its phone numbers. 1. Contacts list entry you wish to find (such as the area code Use the Up/Down navigation keys to highlight the name of or area code and exchange — for example, 888-987). the group you wish to browse, then press . The 2. selected Group list appears in the display.
2. Press Edit ( ). The Edit Contact screen appears in the 3. Use the Up/Down navigation keys to highlight a number stored in this contact entry. 4. Press 5. Press and hold • Wait — A hard pause stops the calling sequence until further input from you. display with the contact name highlighted. Tip: You can enter multiple two-second pauses to extend the length of a pause. For example, two consecutive two-second pauses cause a total pause time of four seconds. to backspace and delete numbers.
4. Press to enter the highlighted pause into your number sequence. 5. When you’re finished entering the number and pauses, press Save ( your choice. ) to store the number in your Contacts. Add Pauses to an Existing Contacts Entry 1. • Wait — a hard pause (awaits input from you). • 2-Sec Pause — a two-second pause. 6. Use the navigation keys to highlight the pause option of 7. Find the desired entry in the Contacts list. (For more information, refer to “Finding a Contacts Entry” on 8.
Note: If a contact has more than one stored number (such as Home and Office), you can select which of these numbers your phone will dial when you Speed Dial that Contact. 4. Press Options ( 6. . The Speed Dials screen appears in the display. Enter, or use the Navigation key to select, an unassigned Speed Dial number. 7. Press to assign the new Speed Dial number to the page 37.) 3. 4.
4. Use the keypad to edit the E-Mail address. (For more information, refer to “Entering Text” on page 30.) • To insert the @ symbol, do the following: – Press the abc ( ). A pop-up menu appears in the display with Abc highlighted. – Use the Up/Down navigation keys to highlight Symbols, then press . – Highlight the @ symbol, and press . – Enter the remainder of the e-mail address using the keypad. (For more information, refer to “Entering Text” on page 30.
• Colleague • Family • Friends 6. 1. (other than No Group) that you wish to rename, then press then press 4. page 37.) 2. ). The following options appear in the display: • Send Txt Msg — Lets you send a text message to all contacts in the selected Group. • Send Pic Msg — Lets you send a picture message to all contacts in the selected Group. • Rename — Lets you change the name of the selected Group. • Erase — Lets you delete the selected Group (this does not delete the related Contacts).
Section 7: Messaging This section explains how to create, send, receive, and view different types of messages. This section also describes the features and functionality associated with messaging. Accessing Your Messages 䊳 To access the Messages menu from standby mode, do one of the following: • Press the Messages shortcut (Up navigation) key. • Press MENU ➔ Messages. The Messages menu appears in the display.
• To change the text input method, do one of the following: – Repeatedly press and hold the key until the desired text input method is indicated by the left soft key label. – Press the Left soft key ( ), use the navigation keys to select the desired text input method, and press . • Press the Left soft key ( ) to select one of the following text entry methods: – T9 Word – Abc – ABC – 123 – Symbols 5. At any point while composing a message, you can set message send options by pressing Options ( 6. ).
(See Step 4 of “Creating and Sending a Text Message” on page 45 for more information on choosing a text entry method, also see “Entering Text” on page 30 for more information on using text entry methods.) 7. To set message send options, press Options ( page 48.) To add a picture to the message, use the navigation keys to highlight the Pic field. • Press My PIC ( ) to access the picture gallery. If there are no pictures in the gallery, press Camera ( ) to launch the camera, then take a picture.
Postcard Messages Your phone’s camera lets you quickly send photos overlaid with handwritten messages as postcards attached to Picture messages, rather than using the keypad to enter your message. You can also include a sound file and keypad-entered text. 1. In standby mode, press the Multimedia (Down navigation Tip: For best results, write your message on white or light-colored, unruled paper (that is, no lines). 5. (“zoom in on”) the message, as needed. 6. key), then My Images.
1. After you’ve composed a text or picture message, press Options ( ). The following are Send Options that can appear in the display (which options appear depends on what type of message you composed and what message • Delivery — Lets you set Message Receipt (On/Off), message Priority (Normal/Urgent), and whether to include your Callback Number or Signature in a message. • Cancel Msg — Exists your message and prompts you to save it. 2.
Receive Messages While in a Call Checking your Voicemail When you receive a message while in a call, a New Message notification appears in the display along with the closed envelope icon ( ). The date and time of the message and the following options also appear in the display: • View Now — Opens the message where you have the option to Play Again, Forward, Reply With Copy, Save PIC, Save Sound, Save Video, Save Preset Msg, Lock/Unlock, Add To Contacts, Callback# or Message Info.
• Press Options ( ). The following options appear in the display: – Reply — Lets you reply to a message. – Reply With Copy — Text Message only — Lets you reply to a message and include a copy of the original message. – Forward — Lets you forward the message to other e-mail addresses or mobile phone numbers. – Lock / Unlock — Blocks or allows erasure of the selected message. – Add To Contacts — Lets you add the addressee numbers or e-mail addresses to your Contacts list.
Tip: Verify whether and when a message or e-mail was successfully received by enabling the Delivery Ack message send option. (See “Message Send Options” on page 48 for more information.) 1. From the Messages menu, select Outbox. A list of your 2. Use the navigation keys to highlight a message, then do outgoing messages appears in the display. one of the following: • Press Erase ( ) to delete the message. • Press OPEN ( ) to view the highlighted message, then proceed to Step 3. • Press Options ( ).
1. From the Messages menu, select Drafts. A list of your draft messages appears in the display. 2. Use the navigation keys to highlight the message that you wish to edit, then do one of the following: • Press Erase ( ) to delete the message. • Press EDIT ( ) to view the highlighted message, then proceed to One of the following screens appears in the display: – Text Message — Create Txt Msg screen showing the To list appears in the display.
• Press the key to exit the message. You are prompted to save your changed message to the Drafts folder. Voicemail New voice messages in your voice mailbox are logged in the Voicemail folder of the Messages menu. Open the Voicemail folder to view the Callback # (if available), Urgency, and other details of new voicemail messages. 1. From the Messages menu, select Voicemail.
• Notification — Lets you choose whether to be notified of a new message by the appearance of an on-screen message and the new message icon or by the Icon Only. • Auto Save — Lets you set whether to automatically save to the Outbox folder, to discard, or to prompt you to save unsent messages when you exit them. • Auto Erase — Automatically erase the oldest read message after memory is full. • Auto View — Automatically displays the message.
Section 8: Browser This section outlines how to launch Browser, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed. Browser With Browser, you can conveniently surf the web and download ringtones and wallpapers using your phone. Each time you launch Browser, your phone connects to the Internet and the service indicator icon ( ) appears in the display.
• Simple text. You can act upon options or links by using the soft keys. Browser soft keys The bottom of the Browser display is a bar that contains browser commands. The Left and Right ( ) soft keys on the keypad are used to execute the command that appears above them in the display. These are called “soft keys” because their function changes depending on the application. Using Links Links have several purposes, such as jumping to a different page, to a different site, or even initiating a phone call.
Section 9: Games & Apps This section explains the Games & Apps features where users can download multimedia, applications, games, and check news and sports. • Use the navigation keys to select an application on your phone that you wish to launch. Finding Applications With Games & Apps, you can download full featured applications over the air including games, personalized ring tones, pictures, and more. 1. In standby mode, do one of the following to launch Games & Apps: • Press the Right navigation key.
Section 10: Camera Use your The r430 phone to take full color digital pictures, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera. This section explains how you can do the following: • Take pictures with your phone’s built-in digital camera. • Send and receive pictures taken with your phone’s camera.
Taking Multi Shot Pictures When taking pictures of moving subjects or subjects you cannot pose, such as children and pets, the camera’s Multi Shot mode simplifies the process of taking multiple pictures in quick succession. After taking Multi Shot pictures, the camera automatically displays thumbnail views of the pictures you have just taken so you can select the best picture(s) and discard the rest. 1. In camera mode, press Options ( in the display with the Self Timer 2.
– To send the picture in a picture message, press Send ( – To discard the picture, press Erase ( ). ). Camera Screen Layout When you activate your phone’s camera, the second line of the display is reserved for the current camera resolution setting and the picture counter. The center of the display shows a viewfinder image of the subject at which the camera is pointed.
Multi Shot in use (Series Shot) — Takes multiple pictures when you press . The number of pictures taken depends upon the Series Shot setting. Self Timer in use — Delays the camera shutter from 2 to 10 seconds after you press . Saving Pictures After you’ve taken a picture, you can do any of the following: • Save the picture by pressing Save ( ). A picture is stored in the My Images folder. This folder is part of the phone’s memorydevoted to storing, browsing, and viewing saved pictures.
• 5 Seconds • 10 Seconds 2. Press . If you select 2 Seconds, 5 Seconds, or 10 2. in the display. Note: When a Multi Shot option is set to a value other than Off, either the Series Shot progress bar ( ) or the Divided Shot icon ( ) appears in the viewfinder screen. , the countdown timer The next time you press TAKE ( indicates the time remaining before the camera takes the picture.
Each option, as you highlight it, shows the effects it has on 3. When you decide on the Fun Frame you wish to use, press a picture. 2. . The camera screen appears in the display with your When you decide on the White Balance you wish to use, selected Fun Frame in place. press The next time you press TAKE ( . The camera viewfinder screen appears in the display with your selected White Balance applied.
3. Highlight the color effect of your choice, then press . You’re returned to the camera viewfinder screen. When you take your next picture, the phone’s display shows your subject image with the selected Color Effect. Settings Most camera options apply only during the current camera session. Camera settings, however, apply to all camera sessions until you change or reset their values. Auto Save 1. In camera mode, press Options ( ), then select Settings ➔ Auto Save.
2. Highlight the Night Shot setting of your choice, then press . You’re returned to the camera viewfinder screen. Shutter Sound Choose from four different sounds whenever you take a picture. Aside from being a cool sound effect, Shutter Sounds acts as an audible reminder that your camera has taken a picture. 1. • Landscape — Shows a wider, more panoramic view of the subject. • Portrait — Shows a narrower, more vertically oriented view of the subject. 2.
2. The following options appear in the display: Fine, Normal, or Economy. 3. Reset Settings 1. Highlight the desired Quality setting, then press • To reset the camera settings to default values, select the Yes option. • To keep the current camera settings, select the No option. Resolution 1.
lightens or darkens to show the affects of your changes). The next time you TAKE ( ), the camera takes a lighter or darker picture according to your selected Brightness setting. The Photo Gallery Saved pictures are stored in the My Images folder. You can browse the pictures one at a time (expanded mode), or view several pictures at once in thumbnail format. 1. In camera mode, press Gallery ( ). Thumbnail images of the first 4 of any pictures that you’ve saved appear in the display.
Switch From Expanded to Thumbnail Mode 1. 2. message fields. (For more information, refer to “Creating ). Press VIEW ( 6. 1. In standby mode, press and hold the Camera key 2. Using the display as a viewfinder, take the desired picture ( ) to activate the camera. by pressing TAKE ( Press SEND ( ). ). The picture is saved automatically, and the Create Pic Msg screen appears in the display.
Section 11: Multimedia This section outlines your phone’s multimedia functions and key features associated with multimedia. Accessing Multimedia 1. In standby mode, press MENU ➔ Multimedia. The following Multimedia sub-menus appear in the display: • Camera — Lets you launch and set up your phone’s camera. (For more information, refer to “Camera” on page 59.) • My Images — Lets you choose the multi-media or pictures that appear in your phone’s display.
• Send — Lets you send the selected image to a specified recipient in a Picture Message or to another device Via Bluetooth. • Set As — Lets you assign the selected picture as the Main Wallpaper, Front Wallpaper, or as the Picture ID for a Contact. • Create Postcard — Lets you create and send a Postcard message. (For more information, refer to “Postcard Messages” on page 48) • Rename — Lets you rename the picture. • Lock / Unlock — Lets you protect the picture from being deleted.
• • • • Lock / Unlock — Lets you prevent/permit file deletion. Erase — Erases the selected file. Rename — Lets you rename the selected file. Ringtone Info — Displays information about the selected file, such as the file name, the file type, and the data size. • Get New Ringtones — Launches the Browser so that you can download ringtones. Use the Navigation key to highlight an option, then press . 5. Press Note: Recorded sound files (voice memos) do not appear in these lists. 2.
– Set As — Lets you assign the selected sound file as the Ringtone or as the Contact ID for a Contact or an Alert Tone for Text, Picture, or Voicemail messages. – Erase All — Erases all sound files. – Sound Info — Displays information about the sound file, such as the file name, file type, and the data size.
1. From the Multimedia menu, select My Sounds. A list of sound files appears in the display. • Send — Lets you send a copy of this voice memo as part of a Picture Message or to another device Via Bluetooth. • Set As — preloaded sound files only — Lets you set this sound file as a Ringtone, Contact ID ringer, or Alert Tone. • Rename — Lets you change the name of this voice memo. • Lock/Unlock — Blocks/permits erasure of this voice memo. • Erase all — Erases all unlocked sound files that are not preloaded.
Section 12: Tools/Utilities This section explains how to use your phone’s digital assistant functionality to schedule events, set reminders, create a “to do” list, perform calculations, and more. Tools/Utilities Menu Tools/Utilities is a suite of Personal Information Management (PIM) applications such as a Calendar, To Do List, and Memo Pad that run on your phone.
Turn Bluetooth On/Off When the Bluetooth is turned on, you can use the Bluetooth features available. When the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To save battery life or in situations where Bluetooth use is prohibited, such as airline traveling, you can turn off the Bluetooth wireless technology headset. 3. device user manual for more information.) 4. Press . Names of the available devices appears in the display. 5.
1. Highlight the device and press 2. If you are unable to pair with the device a popup appears in the display. Press Yes ( . View an event 1. ) to retry. A calendar appears in the display with the current date Bluetooth Settings Enable/Disable highlighted. The month and year also appear. 2. Allows other users to see your accessibility. Select On for other devices to see your device for 1 minute, or Off for no visibility. Device Name Shows the handset name.
2. Highlight the date of the new event, then press Add ( ). If you have any stored memos, they appear as a list in the The New Event screen appears in the display. 3. display. If this is your first time in Memo Pad, “No memos” appears in the display. Use the Navigation key and the keypad to select and enter details of the event. (For more information, refer to 2. “Entering Text” on page 30.) To add a new memo, press Add ). A numbered Memo screen appears in the display.
Alarm Clock Use the Up and Down navigation keys to select options, and use the Left and Right navigation keys to select values Your phone has an alarm clock that can be set to go off once, or daily at a specified time. Once set, the alarm clock is easy to change or turn off completely. Note: The alarm doesn’t function when the phone is turned off. If the time for an alarm that was set for Once has elapsed and the phone is off, the alarm occurs at the same time on the following day. 1.
Disabling Alarms 3. Highlight an active alarm. Turn Off the Alarm 4. Press Options ( Turning an Alarm to Off allows you to retain the current settings for later reuse. 1. From the Tools/Utilities menu, select Alarm Clock. The following options appear in the display: • Alarm 1 • Alarm 2 • Alarm 3 2. Select an active Alarm selection. The associated Alarm screen appears in the display with the Alarm option highlighted. 3. Use the Left/Right navigation keys to select Off, then press .
The following time zones/cities are supported: EST/EDT: Caracas Brasilia Mid Atlantic Detroit Washington D.C New York Montreal Boston Cape Verde PST/PDT: MST/MDT: CST/CDT: Seattle San Francisco Los Angeles Denver Arizona Dallas Chicago Houston Mexico City 3. Press Options ( ) and select to display (DST On) or not display (DST Off) Daylight Savings Time (DST) for the London Paris selected time zone.
• Press to enter a decimal point. (Calculator only accepts 2 digits after a decimal point.) • Press to change the sign for a number to a negative. 3. Use the Navigation key to set the type of calculation that 2. Press 3. Press Record ( equation. For additonal equation entry options, press Operator ( ). The following options appear in the display: • ( — Beginning of nested equation • ) — End of nested equation • Power — Raise the entered number to a power 5.
3. Enter the quantity you want converted in the From field. The converted quantity appears in the To field. Note: To include a decimal point, press the key. Currency — Reviewing/Editing Exchange Rates The Currency Converter includes long-term average exchange rates as default values. To review and/or change a default exchange rate to the current exchange rate, do the following: 1. Press Rate ( Use the Left/Right navigation keys to display the Exchange 4.
7. Press the Down navigation key to highlight the Exchange 4. Rate field. 8. 5. the keypad. (For more information, refer to “Entering key to enter the decimal point. The Exchange Rate field only accepts two digits after the decimal point. Press SAVE ( ) to save the new exchange rate. Currency — Erasing Exchange Rates You cannot erase the preloaded currencies from the Exchange Rate list. You can erase a currency that you have added to the list by doing the following: 1.
4. Use the keypad to enter a tip percentage. (For more information, refer to “Entering Numbers” on page 32.) 5. If needed, press the Down navigation key to highlight the # Paying field. 6. Use the keypad to enter the number of persons paying. (For more information, refer to “Entering Numbers” on page 32.) 7. The amount of the Tip, the bill Total, and the amount Each person should pay appear in the lower half of the screen.
Section 13: Voice SVC This section explains how to use your phone’s digital assistant functionality to schedule events, set reminders, create a “to do” list, perform calculations, and more. Launching Voice Service VoiceSignal is state-of-the-art voice recognition software for your mobile phone that lets you dial numbers, lookup contact information, and open applications using your voice. To access your phone’s voice settings, do the following: 1. In standby mode, press MENU ➔ Voice Service.
• Go to — Lets you access the Voice Memo, Calendar, and Contacts List Voice Settings features of your phone. (See “Voice Memo” on page 73, “Calendar” on page 77, and “Your Contacts List” on page 34 for more information.) • Check — Lets you check your phone's status (that is, network coverage, signal strength, and battery in the same report), network coverage, signal strength, battery, and phone number. Choice Lists Note: Speaking clearly, say the command that you want to use.
Use the navigation keys to highlight the Choice List behavior you prefer, then press the key to accept the • Speak clearly, and say each digit distinctly. Sensitivity From the Voice Service menu, select Voice Settings ➔ Sensitivity. The Sensitivity screen appears in the display. 2. Use the Up/Down navigation key to adjust the Sensitivity setting to Reject More spoken commands or names or to Reject Less spoken commands or names. 3.
3. Wait for the beep and say the digits using your normal tone digit adaptation rest. Press OK ( • If the recording was good, say “Yes.” • If you need to re-record, say “No.” If you say “No,” the phone prompts you to pronounce the Back ( Repeat this step until you’re satisfied with the recording. After 10 sets of digits, “Adaptation complete” plays through the speaker and you are returned to the Digit Dialing menu. Reset Digits To reset digit dialing to factory default settings, do the following: 1.
• Key Only — Press and hold to activate VoiceSignal for one call. • Key / EarMic — Attach a headset to your phone. Press and hold to activate VoiceSignal. Now, you can make and end calls using VoiceSignal by pushing the button on the headset. Press to release VoiceSignal. • Key / Flip — Press and hold to activate VoiceSignal for repeated calls. Open and close the flip to make and end calls using VoiceSignal. Press to release VoiceSignal. 2.
Section 14: Changing Your Settings This section explains how to customize your phone to suit your needs and preferences. Accessing Your Settings 䊳 • Press Settings ( ). • Press MENU ➔ Settings. The Settings menu appears in the display. Location This function identifies your location to the network via the Global Positioning System (GPS). You can set this function for continuous operation or to operate only in the event that you dial 911.
• Backlight — Lets you set backlight options for the LCDs, keypad, and set the brightness. • Front Contrast — Lets you set contrast level for the Front (Sub) LCD. 2. Use the navigation keys to highlight a sub-menu. 3. Press to enter the highlighted sub-menu. The following sections describe the above listed display submenus in greater detail. Menu Style Menu Style allows you to choose how main menus appear in your display. 1. At the Settings menu, select Display Settings ➔ Menu Style.
1. From the Settings menu, select Display Settings ➔ Clock The following options appear in the display: Format. The following clock options appear in the display: • Main Clock • Front Clock 2. Use the navigation keys to highlight the desired clock, then press .
1. At the Settings menu, select Display Settings ➔ Banner. The Banner text entry screen appears in the display. Note: If necessary, press and hold the 2. key to erase an existing banner. 3. more information, refer to “Entering Text” on page 30.) Press to save the new banner. to enter the highlighted option’s sub-menu and Front Contrast Set the Front (Sub) LCD contrast to your preference. 1. At the Settings menu, select Display Settings ➔ Front Contrast.
Volume Use the Volume sub-menu to set the default volume for incoming calls and alarms, or set the phone to vibrate. 1. At the Settings menu, select Sound Settings ➔ Volume. The following options appear in the display: • Voice Calls — Lets you set the volume and/or vibration for the incoming calls ringer. • Messages — Lets you set the volume and/or vibration for the incoming messages ringer. • Alarms — Lets you set the volume and/or vibration for the alarm ringer. 2. Select a Volume option. 3.
1. At the Settings menu, select Sound Settings ➔ Alerts. 2. The following Alerts sub-menus appear in the display: • Use the Volume key or Navigation key to set the keypad tones volume. • Press SET ( ) when the desired key tone volume setting is reached. You are returned to the Key Tone sub-menu. 3. Select Tone Length, then use the Navigation key to • Minute Beep — Sounds an alert ten seconds before each elapsed minute of a call. • Roaming — Sounds an alert when you leave your home service area.
• Flip Open — Open the flip or press call. to answer an incoming Tip: You can set your phone to answer calls automatically, without any input from you. (For more information, refer to “Auto Answer” on page 97.) 2. Highlight the method you wish to use for answering calls, then press Auto Retry automatically re-dials a number if the connection fails. Depending upon your location, the number of times your phone automatically dials the number may vary. 1.
Privacy. The following options appear in the display: Note: The “Enabling TTY may impair headset use and non-TTY accessory performance.” message pops up when you select TTY Mode. 2. To access the TTY Mode options, press Yes ( ). To return to the Call Settings sub-menu, press No ( 3. When you press Yes ( • Standard — Voice privacy is disabled • Enhanced — Voice privacy is enabled 2. Use the Navigation key to highlight the Voice Privacy ).
Press No ( ) to make another selection. Language The language option on your phone can change the language of voice prompts, menus, and key-input. 1. At the Settings menu, select Phone Settings ➔ unlock the phone to place outgoing calls (except to emergency and secret numbers). 1. At the Settings menu, select Phone Settings ➔ Security. You’re prompted to enter the lock code. Note: The default lock code is the last four digits of your telephone number. Language.
You’re prompted to enter the lock code. Note: The default lock code is the last four digits of your telephone number. 2. Enter the lock code, then select Change Lock. You’re 3. Enter the New Lock Code. You’re prompted to re-enter the Important!: Because of various transmission methods, network parameters, and user settings necessary to complete a call from your wireless phone, a connection cannot always be guaranteed.
emergency number. 2. Press You’re prompted to enter the lock code. to place the call. Note: The default lock code is the last four digits of your telephone number. Resetting Your Phone Reset Phone returns all Settings options to their factory default. 1. Note: The default lock code is the last four digits of your telephone number. Note: The default lock code is the last four digits of your telephone number. 3. You are prompted to confirm erasure of all entries. 4.
• Incoming — Blocks/allows all incoming calls. • Contacts — Blocks/allows all access to Contacts list entries. 3. Select the desired Restriction. The following options Set Time Use the Set Time option to set the current date and time while in an analog network. appear in the display: • On — Enable the selected Restriction. • Off — Disable the selected Restriction. 4. Use the Navigation key to highlight On or Off, then press to save and implement your new setting.
– Press to save the your Time setting. 3. Quick Search menu item. Quick Search is an easy way to locate Menu items and Contacts. 1. At the Settings menu, select Phone Settings ➔ Quick Search. The following options appear in the display: • On — Quick Search is enabled • Off — Quick Search is disabled 2.
Memory Info 1. 1. At the Settings menu, select Memory Info. The Memory Info screen appears in the display showing the following information: • Total Used memory usage • Available unused memory • My Photos memory usage • My Ringtones memory usage • My Sounds memory usage • Applications memory usage 2. Press to return to the Settings menu.
ESN / MEID You can view the ESN (Electronic Serial Number)/MEID (Mobile Equipment Identifier) values for your phone in both Decimal and Hex values from this menu. 1. At the Settings menu, select Phone Info ➔ ESN/MEID. The ESN/MEID information displays in Dec and Hex. 2. Press to return to the Phone Info menu. Warranty Date Code The device provides a customer warranty date code. The code (date MM/DD/YYYY and time HH:MM) is populated into the device after 10 minutes of CDMA usage time.
Section 15: Health and Safety Information This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone. Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.
contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: • Head: 0.789 W/kg • Body-worn: 0.
Consumer Information on Wireless Phones The U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following information: What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called "cell," "mobile," or "PCS" phones.
health hazard and to repair, replace or recall the phones so that the hazard no longer exists.
cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since December 2000.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users.
was not based on scientific evidence that any health hazard exists. Do hands-free kits for wireless phones reduce risks from exposure to RF emissions? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort.
wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000. FDA continues to monitor the use of wireless phones for possible interactions with other medical devices.
3. Position your wireless phone within easy reach. Be able to 7. may be distracting. Make people you are talking with from the road. If you get an incoming call at an aware you are driving and suspend conversations that inconvenient time, let your voice mail answer it for you. 4. Let the person you are speaking with know you are driving; have the potential to divert your attention from the road. 8. if necessary, suspend the call in heavy traffic or hazardous traffic can be hazardous.
"The wireless industry reminds you to use your phone safely when driving." For more information, please call 1-888-901-SAFE, or visit our web-site www.ctia.org. Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233. Provided by the Cellular Telecommunications & Internet Association. Responsible Listening Caution!: Avoid potential hearing loss. Damage to hearing occurs when a person is exposed to loud sounds over time.
• Avoid using headphones after exposure to extremely loud noises, such as rock concerts, that might cause temporary hearing loss. Temporary hearing loss might cause unsafe volumes to sound normal. • Do not listen at any volume that causes you discomfort. If you experience ringing in your ears, hear muffled speech or experience any temporary hearing difficulty after listening to your portable audio device, discontinue use and consult your doctor.
As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder if you are using an external antenna). Using Your Phone Near Other Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals.
The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box. The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss.
Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. Restricting Children's access to your Phone To make an emergency call: FCC Notice 1. If the phone is not on, switch it on. 2.
Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it. Other Important Safety Information • Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device. • Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.
Maintaining Your Phone's Peak Performance For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty. There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service. • To ensure that the Hearing Aid Compatibility rating for your phone is maintained, secondary transmitters such as Bluetooth and WLAN components must be disabled during a call.
• Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery. • If left unused, a fully charged battery will discharge itself over time. • Use only Samsung-approved batteries and recharge your battery only with Samsung-approved chargers.
Care and Maintenance Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this product for many years. • Keep the phone and all its parts and accessories out of the reach of small children. • Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. • Do not use the phone with a wet hand.
Section 16: Warranty Information Standard Limited Warranty What is Covered and For How Long? SAMSUNGTELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date: Phone 1 Year Batteries 1 Year Leather Case 90 Days Holst
facility in an adequate container for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
Precautions for Transfer and Disposal If data stored on this device is deleted or reformatted using the standard methods, the data only appears to be removed on a superficial level, and it may be possible for someone to retrieve and reuse the data by means of special software.
Index A Adjust key tone 96 ringer setting 15 B Backup to last menu 28 Battery 5 Charging 4 Low Battery Indicator 5 Removal 6 Travel Adapter 4 Bluetooth 75 Add New Device 76 Connecting 76 Registered List 76 Settings 77 Turn On/Off 76 Browser 56 How Browser Keys Work 57 Launching Browser 56 Using Browser 56 Using Links 57 129 C Call Answer mode 14 Call Functions 17 Adjusting the Call Volume 22 Answering a Call 21 Call Log 22 Making a Call — Number Entry Dialing 17 Making a Call — Speed Dialing 18 19 Call Se
Dialing Font Size 93 Front Contrast 94 Menu Style 92 Theme Color 93 Wallpaper 92 E Emergency Calls 17 End key 11 Entering Text 30 Alpha (Abc) Mode 30 Entering Numbers 32 Entering Symbols 32 Entering Upper and Lower Case Letters 32 Text Entry Modes 30 Erase memos 74 ESN 105 Exit Browser 56 G Gallery Photo 68 Games & Apps 58 Getting Started 4 Activating Your Phone 5 Understanding this User Manual 4 Voicemail 7 H HAC 117 Health and Safety Information 106 I Icon Glossary 104 Input mode 14 International Cal
Notes, description 4 Number Entry Dialing 17 O OK key 11 P Personal Organizer Alarm Clock 79 Calculator 81 Calendar 77 Memo Pad 78 Voice Memo 73 World Time 80 Phone Info ESN/MEID 105 Icon Glossary 104 Phone Number 104 Version 104 Phone Number 104 Phone Safety 116 Phone Settings 98 Airplane Mode 98 Language 99 Quick Search 103 Security Settings 99 Set Time 102 131 System Select 102 Photo gallery 68 Photos Sending 69 Picture (Pic) message 46 Picture Messages Postcard 48 Postcard Picture Messages 48 R Rece
Phone Info 104 Phone Settings 98 Quick Search 103 Resetting Your Phone 101 Restriction 101 Ringer Type 95 Security 99 Security Settings 99 Set Time 102 Sound 94 Sound Settings 94 System Select 102 Theme 93 TTY Mode 97 Voice Privacy 98 Voicemail 50 Volume/Vibrate 95 Wallpaper 92 Shortcut to menus 29 Shutter sound 66 Silent mode entering 15 exiting 15 Sound Settings 94 Alerts 95 Key Tone 96 Ringer Type 95 Volume/Vibrate 95 Speed Dialing 18 One-Touch Dialing 18 Three Touch Dialing 19 Two-Touch Dialing 18 Stan
Setup 50 VoiceSignal About VoiceSignal 90 Voice Memos 73 W Warranty Information 125 133
