User's Manual

45
Choice Lists
When Vsuite cannot recognize a name or number, it displays a
choice list of up to three possible choices, and prompts you to
confirm the correct one. To change the way Vsuite uses choice
lists:
䊳 From the Voice Settings menu, select Choice Lists and
select one of the following:
• Automatic : A choice list displays only when a spoken name or
number is not recognized.
• Always On : A choice list always displays, even when there is only
one choice.
• Always Off : A choice list never displays.
Sensitivity
1. In Standby mode, press Menu ➔ Tools ➔ Voice SVC ➔
Voice Settings.
2. Select Sensitivity.
3. Use the navigation keys to adjust the selected Sensitivity
setting. Select a range between Reject More spoken
commands or names and Reject Less spoken commands
or names.
Digit Dialing
If you regularly have trouble with Vsuite not recognizing the
numbers you speak, adapting can improve the accuracy of digit
recognition.
Note: After you adapt Digit Dial, your phone is customized and responds only
to your voice. Reset the phone to factory defaults to allow others to use
this feature.
Tips for Adapting Digit Dialing
• Use Adapt Digits in a quiet place.
• Wait for the beep before speaking.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that interrupts the recording, re-record the
sequence.
Adapt Digits
To adapt digit dialing, do the following:
1. In Standby mode, press Menu ➔ Tools ➔ Voice SVC ➔
Voice Settings.
2. Select Digit Dialing ➔ Adapt Digits.
3. Read the descriptive text and press OK to begin.
4. At the beep say the digits using your normal voice.