User's Manual

Voice SVC 46
After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?”
5. Say Yes to approve the recording, or No to re-record.
If you say “No,” the phone prompts you to pronounce the
digits again.
Repeat this step until you’re satisfied with the recording.
6. Continue the recording process.
After 10 sets of digits, the phone asks whether you want to
do more adaptation.
7. If you answer Yes in step 5, repeat steps 4 and 5 for
another 10 sets of digits.
After the second group of 10 sets of digits, Adaptation
complete plays through the speaker and the Digit Dialing
menu displays.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. In Standby mode, press Menu ➔ Tools ➔ Voice SVC ➔
Voice Settings.
2. From the Voice Settings menu, select Digit Dialing ➔
Reset Digits. The phone prompts you to confirm digit
reset.
3. Press OK to reset your digit adaptation, or press Back to
cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1. In Standby mode, press Menu ➔ Tools ➔ Voice SVC ➔
Voice Settings.
2. Select Sound.
3. Select one of the following options and press or
to accept the new setting:
• Prompts : Enables or disables audio prompts.
• Digits : Enables or disables digit playback.
• Names : Enables or disables name playback.
• Name Settings : Allows you to adjust the Speed ( Faster , Slower
or Recommended ) and Volume ( Louder , Softer , or
Recommended ) for the phone’s audio name playback.
4. Press or to discard the new setting and return
to the Sound menu.