User's Manual

57
䊳 In Standby mode, press
Menu ➔ Tools ➔ Bluetooth
➔Registered List.
A list of registered
Bluetooth devices or the
Add New Device screen
displays.
Add (Pair With) a New Device
1. In Standby mode, press
Menu ➔ Tools ➔ Bluetooth
➔Registered List.
Note: Bluetooth must be turned on before you use this menu.
2. From the Registered List press OK .
3. Make sure the device you are pairing with is already set
to Discoverable.
4. Locate the device in the Add New Device list, then
press PAIR .
Note: You may be prompted to enter a passkey or PIN for this device. (See
the device user manual for the passkey or PIN.)
5. Enter the device passkey or PIN and press or .
When pairing completes, you are promped to connect with
the device.
6. Press Yes . to pair.
Connecting to a Registered (Already Paired) Device
1. In Standby mode, press Menu ➔ Tools ➔ Bluetooth
➔Registered List.
2. From the Registered List, highlight the device and press
or .
Unpairing from a Bluetooth Device
1. In Standby mode, press Menu ➔ Tools ➔ Bluetooth
➔Registered List.
2. From the Registered List, highlight the device and press
Off.
Bluetooth Settings
The Bluetooth Settings menu provides the ability to view and
change the device name, show the visibility, and set the security
for the device.
To access Bluetooth settings:
1. In Standby mode, press Menu ➔ Tools ➔ Bluetooth
Bluetooth Settings.