User manual

134
2.
If you are unable to connect with the device a pop-up appears in the
display. Press the Yes soft key to retry.
Disconnecting from a Bluetooth Device
In standby mode with Bluetooth on,
䊳 Turn the other, registered Bluetooth device off. The Bluetooth Connected
(blue) icon ( ) is replaced by the Bluetooth On (black) icon ( ).
From the Registered List,
䊳 Highlight the device and press the Off (left) soft key ( ).
Managing Your Registered List
From the Registered List,
1. Highlight a device and press the Options soft key. The following options
appear in the display.
• Remove Device — Deletes the device from the Registered List.
• Rename Device — Lets you change or replace the device name, as needed.
• Device Info — Shows the type of device, status, address, the date when it was
paired with your phone, and the date the device was last connected with your
phone.
2. Highlight the desired option and press the key to access that option.
Bluetooth Settings
Enable/Disable
Selecting this option turns your phone’s Bluetooth function on or off.
Discovery Mode
Allows other Bluetooth devices to “see” your phone for 1 minute. Select On for other
devices to see and pair with your phone, or Off for no visibility.
Note: Once you have paired your phone with another device, you do not need to set Discovery Mode to On
to reconnect with the other device (such as, after turning one or both devices off).
Device Name
Shows your phone’s current Bluetooth name. You can change this name. Enter the
new name in the Enter New field and press the key. (For more information, see
“Entering Text” on page 48.)
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.