User manual

Settings 159
Phone Settings
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3. Press for Lock Phone. The following options appear in the display:
•Lock — The phone locks immediately and stays locked until you enter the lock
code.
• Unlock — The phone remains unlocked.
• On Power Up — The phone locks automatically the next time your phone is
powered on and stays locked until you enter the lock code.
4. Use the navigation keys to highlight the Lock Phone option of your choice.
5. Press to perform the function for the highlighted option.
Change Lock
The default lock code is generally the last four digits of your phone number. It is
advisable to change the default lock code to a secret code for security purposes.
1. In standby mode, press the Settings (left) soft key ( ), then press
(for Phone Settings) and for Security.
The “Enter Code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3. Press for Change Lock. You’re prompted to enter the New Lock
Code.
4. Enter the New Lock Code. You’re prompted to re-enter the New Lock Code
for verification.
5. Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
Emergency #
You have the option of storing up to three emergency numbers to your phone. Each
number can be up to 32 digits in length. All emergency numbers can be dialed any
time, even when your phone is locked or restricted.