User manual

160
Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even
when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters, and user settings used to
complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for essential or
emergency calls.
Remember to always turn your phone on and check for adequate signal strength
before placing a call.
Note: When you dial an emergency number, you phone locks itself to the emergency location that answered
the call and locks itself in 911-Only mode, blocking from dialing any number but an emergency
number.
Store Emergency Numbers
1. In standby mode, press the Settings (left) soft key ( ), then press
(for Phone Settings) and for Security.
The “Enter Code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3. Press for Emergency #.
4. Press , , or to select one of the three emergency numbers.
5. Enter the emergency number (up to 32 digits in length).
6. Press to save the number that you entered.
7. Press Cancel (right) soft key ( ) to discard your entry and return to the
previous menu.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number via the keypad.
2. Press to place the call.