User manual

Command Keys

Functions for the soft keys are defined by what appears above each in the display.

There are two soft keys, the (left) soft key and the (right) soft key .

Left Soft Key

Some functions of the left soft key are as follows.

• With the slide closed, the function is Unlock. Press to Unlock the keys.

• In standby mode, press the Settings (left) soft key ( ) to open the Settings

menu.

• When the left soft key function is Edit, press the Edit (left) soft key ( ) to edit a

Contact.

Right Soft Key

Some functions of the right soft key are as follows.

• In standby mode, press the Contacts (right) soft key ( ) to open the Contacts

list.

• When the right soft key function is Options, press the Options (right) soft key ( )

and a pop-up menu appears.

• When the right soft key function is Back, press the Back (right) soft key ( ) to

back up one menu level.

OK Key

• In standby mode, press the Menu key ( ) to open the main menu.

• In a menu, press the OK key ( ) to accept the highlighted selection.

• In camera mode, press the TAKE key ( ) to take a photo; or the SEND key ( )

to include a photo in a picture message.

• In camcorder mode, press the REC key ( ) to start video recording; and press the

STOP key ( ) to end video recording.

• In messaging mode, press the SEND key ( ) to send a message to the recipient;

or press the EDIT key ( ) to edit a Draft message.

Clear Key

The CLR key ( ) is used to erase or clear numbers, text, or symbols from the

display. You can also use the key to return to a previous menu or to return

to standby mode from any menu.

1. If you enter an incorrect character, briefly press to backspace

(and delete) the character.

2. To erase the entire sentence, press and hold .