User manual

Call Functions 29
Making a Call
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 010 through 099.
1. In standby mode, press and release the number key representing the first
digit of the desired Contact’s Location number.
2. Press and hold the number key representing the second digit of the desired
Contact’s Location number.
Example: To speed dial the Contact assigned Location 035, press , then press and hold the key.
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1. In standby mode, press and release the number key representing the first
digit of the desired Contact’s Location number.
2. Press the number key representing the second digit of the desired
Contact’s Location number.
3. Press and hold the number key representing the third digit of the desired
Contact’s Location number.
Example: To speed dial the Contacts entry assigned to Location 325, press , press , then press
and hold the key.
Voice Dialing
The voice recognition capabilities of your r610 are exceptional due to advanced,
speaker-independent technology. This means you do not need to “train” your phone
to understand your voice. You can use your voice in a natural manner to dial
numbers.
Note: End Calls Before relaunching the VoiceSignal voice recognition software — When you use Voice
Dialing to make a call, you must end that call before you can use other Voice Commands. See “Voice
SVC” on page 95 for more information.
Use the Call command to dial any number stored in your Contacts list by saying the
name of the contact (Name Dialing). You can also use Call to dial any telephone
number, even numbers not stored in your contact list, by speaking the individual
digits in the number (Digit Dialing).