User manual

32
Tip: Assign pictures to Contacts entries. The entry’s assigned picture appears in the display when you
receive a call from that entry. See “Assigning a Picture to a Contacts Entry” on page 60.
The phone continues to notify you of the call until one of the following events occur:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
Call Notification Features
Your phone notifies you of a call in a variety of ways.
• Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium, Medium,
Medium/High, High, or Vibrate/High.
• Different ring types or melodies to distinguish callers.
• Name display with caller ID. (If the caller’s name is programmed into your
Contacts).
• Information about the last 90 each of incoming, missed, and outgoing calls are
automatically stored to a call log.
Set Call Ringer Volume
1.
In standby mode, press the volume key on the left side of the phone.
2. Press the volume key up or down to set the call ringer volume as desired.
Adjust the Ringer
1.
In standby mode, press the volume key ( ) on the left side of the phone up
or down. Options are:
2. Press once you’re satisfied with the setting. The phone returns to
standby mode.
Tip: You can also enter the Voice Calls – Volume sub-menu by pressing the Menu key ( ), then pressing
the , , , and keys. Use the Volume key on the left side of your phone to adjust the
ringer setting.
Note: The Vibrate icon ( ) appears in the display when the phone is in Vibrate mode. The Vibrate/Ring
icon ( ) appears in the display when the phone is in Vibrate/High mode.
• Ringer Off •Medium
• Vibrate • Medium/High
•Low •High
• Low/Medium • Vibrate/High