User manual

Entering Text 51
Entering Numbers
Note: See “Changing the Text Entry Mode” on page 49 for instructions on changing the text entry mode to
Abc.
3. Enter characters while in Abc mode by pressing the key labeled with the
desired characters (such as, press for “G”).
4. Press the key repeatedly until the desired character appears in the display
(such as, press twice for “H”).
5. Pause briefly and the displayed character is accepted and inserted into
your message.
6. Repeat Steps 3 – 5 as needed for each letter of a word.
7. Press to enter a space at the end of the word, or press to enter a
period. (For other punctuation, see “Entering Symbols” on page 51.)
Entering Numbers
Enter numbers into a text message while in 123 mode.
1. In standby mode, press the Up navigation key, then press (for Send
Message), and for Text Message.
2. Enter the phone number of the recipient, then press the key.
Note: See “Changing the Text Entry Mode” on page 49 for instructions on changing the text entry mode to
123.
3. Press the key containing the corresponding number that you wish to insert
into your message.
Entering Symbols
Symbol mode enables you to enter symbols such as “@” or “%” into a text
message.
1. In standby mode, press the Up navigation key, then press (for Send
Message), and for Text Message.
2. Enter the phone number of the recipient, then press the key.
Note: See “Changing the Text Entry Mode” on page 49 for instructions on changing the text entry mode to
Symbols.
The first of three symbol screens appears in the display.
3. Use the Prev (left) and Next (right) soft keys to page through the other
symbols, if desired.