User manual

64
4.
Use the navigation keys to highlight an Unassigned Speed Dial number or
enter an Unassigned Speed Dial number in the Go To field using the
keypad.
Important!: Do not enter Speed Call numbers 001, 311, 411, or 911. These numbers are already assigned
to Voicemail (001), to special network features (311 and 411), and to emergency use (911).
5. Press the SET key ( ). You are prompted to confirm your Speed Dial
number assignment.
6. Press the Yes (left) soft key ( ) to save your Speed Dial assignment and
return to the Add New Entry screen.
Note: Press the No (right) soft key ( ) to discard the assignment and return to the Speed Dial screen.
7. Press the key to save your changes.
Changing a Speed Dial Location
1. Find the Contacts entry you want to edit. See “Finding a Contacts Entry” on
page 54 for more information.
2. Use the Up and Down navigation keys to highlight the desired entry.
3. Press the Edit (left) soft key ( ).
4. Use the Up and Down navigation keys to highlight the number field marked
by the Speed Dial icon ( ).
5. Press the Options (right) soft key ( ). The following options appear in
the display:
• Remove Speed Dial — Unassign the current speed dial number.
• Set As Default — Set the number the phone will dial when Contracts dialing,
speed dialing, or voice dialing.
• 2-Sec Pause — A 2-second pause after which dialing resumes (see “Add
Pauses to Contacts Numbers” on page 58 for more information).
•Wait — A hard pause (waits for input from you).
Use the navigation keys to highlight Remove speed dial, then press the
key. “Remove speed dial?” pops up in the display to confirm your
desire to remove the entry.
6. Press the Yes (left) soft key ( ) to remove the Speed Dial assignment.
“Speed Dial Removed” pops up in the display, and you are returned to the
Edit Contact screen.