User manual

Voice SVC 99
Voice Settings
7. Repeat steps 4 and 5 for another 10 sets of digits. After the second group
of 10 sets of digits, “Adaptation complete” plays through the speaker and
you are returned to the Digit Dialing menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. In standby mode, press the Menu key ( ), then press (for Voice
SVC), (for Voice Settings), and for Digit Dialing. The following
options appear in the display:
• Adapt Digits
• Reset Digits
2. Use the navigation keys to highlight Reset Digits, then press the key.
The phone prompts you to confirm digit rest.
3. Press the OK (left) soft key ( ) to reset your digit adaptation, or press the
Back (right) soft key ( ) to cancel.
Sound
Sound lets you specify what (if any) text prompts you want your phone to read to you
through the earpiece.
1. In standby mode, press the Menu key ( ), then press (for Voice
SVC), (for Voice Settings), and for Sound. The following
options appear in the display:
•Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
•Names — On/Off — Enables or disables name playback.
• Name Settings — Lets you adjust the Speed (Faster or Slower) and Volume
(Louder or Softer) of your phone’s audio name playback.
2. Use the Up and Down navigation keys to highlight the desired option, then
press the key.
3. Use the Up and Down navigation keys to highlight the desired setting.
4. Press the key or the OK (left) soft key ( ) to accept the new setting.
Press the key to discard the new setting and return to the Sound
menu.