User's Manual

Messaging 58
Creating and Sending a Picture Message
1.In standby mode, press the Messages soft key, then select
Create Message ➔ Picture Message . The Picture Msg
screen appears in the display showing the To list.
Tip: You can also access Messages by pressing the Menu soft key and
selecting Messages .
2. Address your message as you
would a Text message (see
“Creating and Sending a Text
Message” on page 56), with
one addition:
• To send this message to your
Online Album, press the Alltel
Mypics button.
3. When you are finished
addressing your message,
press the Next soft key. The
Picture Msg fields screen
appears in the display.
4. If desired, select the Subject field. The QWERTY touch
keypad screen appears in lower-case mode.
Note: You can use any of the Delve’s four text entry screens to enter your
message text. (For more information, refer to “Changing Text Entry
Screens” on page 49.)
5. Enter the Subject text. (For more information, refer to
“Entering Text” on page 49.)
• To use pre-composed text, change from the QWERTY touch keypad
to another text entry screen and press the Add Quick Text soft key.
(For more information, refer to “Changing Text Entry Screens”
on page 49.)
6. If desired, repeat steps 4 and 5 for the Text field.
7. To add a picture to the message, select the Picture field.
You are prompted to Take a Photo or to add a photo from
the My Images folder.