User's Manual

79
7.
To save the picture(s) to memory, press the Save button.
To discard the pictures, press the Erase button. You are
prompted to confirm the erasure.
Taking Videos
To take a video using the current camcorder settings, do the
following:
1. In Camera mode, press the Mode button ( ). The
camcorder view finder screen appears in the display. (For
more information, refer to “Camcorder Screen” on
page 81)
Note: You can also activate the camcorder from standby mode by pressing
the Menu soft key, then selecting Multimedia ➔ Camcorder .
2. Using the display as a viewfinder, point the camera lens at
your subject.
3. Press the Camera key when the image that you wish to
capture appears in the display. Recording continues until
one of the following occurs:
• You press Stop ( ).
• Available memory is used up ( Normal setting).
• 15 seconds of video have been recorded ( Video Msg setting).
4. Press the Save button to save the video to memory.
5. Press the Erase button to erase the video. You are
prompted to confirm the erasure.
Screen Layouts
Camera Screen
When you activate your phone’s camera, the second line of the
display is reserved for the current camera resolution setting and
the picture counter. The center of the display shows a viewfinder
image of the subject at which the camera is pointed.
Camera Screen Buttons
Changes the Camera-Camcorder mode to Camcorder.