User's Manual

160
WPS Push Button
The WPS (Wi-Fi Protected Setup) feature (sometimes paired a
physical or on-screen button on most WAPs) allows you to
pair your device and WAP without entering a passcode.
When the WPS feature is activated, your phone can detect
and pair with a WAP.
To pair the phone using WPS
1. Follow the instructions provided with your Wireless
Access Point.
2. From the Home screen, tap ➔
Settings ➔
Wi-Fi .
3. Press
➔ WPS push button .
4. When the connection completes, look for the router
connected message displayed on the screen.
WPS PIN Entry
When a WPS Push Button does not work you can use a
device-generated PIN number to establish the connection.
Enter the generated PIN in the WAPS WPS client PIN field to
complete the connection.
1. From the Home screen, tap ➔
Settings ➔
Wi-Fi .
2. Press
➔ WPS PIN entry .
3. Enter the generated PIN number into your Wi-Fi
router’s client PIN field.
When connected the router displays in the Wi-Fi list.
Wi-Fi Direct
You can configure your phone to directly connect with other
Wi-Fi devices. Wi-Fi direct allows you to transfer larger
amounts of data between devices.
Other devices must be enabled for Wi-Fi Direct.
Note: Activating this feature disconnects any established Wi-Fi
connection.
Connecting
1. From the Home screen, tap ➔ Settings .
2. Tap the ON/OFF slider, located to the right of the Wi-Fi
field, to turn Wi-Fi ON .
3. Tap
Wi-Fi Direct .
4. Tap Scan and select the device name in which to
connect.
– or –
ON