User Manual (ver.F6)

Tools 107
Voice Kit
Tips for Adapting Digit Dialing
Use Adapt Digits in a quiet place.
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
If you make a mistake while recording a sequence of digits, or if there is an
unexpected noise that spoils the recording, re-record that sequence.
Only adapt digits if you are regularly having problems with digit dialing. Once you
adapt, digit dialing will not work as well for other people using your phone. (You
can always reset digit adaptation to its original state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1. In standby mode, press the MENU (left) soft key ( ), then press
(for Tools), (for Voice Kit), (for Voice Setting), and for
Digit Dialing. The following options appear in the display:
Adapt Digits
Reset Digits
2. Use the navigation keys to highlight Adapt Digits, then press the key.
Adapt Digits process description appears in the display.
3. Press OK (left) soft key ( ) or press the key. Your phone displays
the first digit sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.
4. Wait for the beep and say the digits using your normal tone of voice. After a
moment, the phone plays back the recording and prompts “Did the
recording sound ok?”
If the recording was good, say “Yes.”
If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the digits again. Wait
for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
5. After confirming that the recording sounds “ok”, continue the recording
process with the next set of digits.
6. After six sets of digits, “Adaptation complete” plays through the speaker
and you are returned to the Digit Dialing menu.
tuv
tuv
@
ghi
ghi
@
OK
OK