User Manual (ver.F6)

108
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. In standby mode, press the MENU (left) soft key ( ), then press
(for Tools), (for Voice Kit), (for Voice Setting), and for
Digit Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
2. Use the navigation keys to highlight Reset Digits, then press the key.
The phone prompts you to confirm digit reset.
3. Press the OK (left) soft key ( ) or the key to reset your digit
adaptation, or press the Back (right) soft key ( ) to cancel.
Sensitivity
1. In standby mode, press the MENU (left) soft key ( ), then press
(for Tools), (for Voice Kit), (for Voice Setting), and for
Sensitivity. The following options appear in the display:
• Commands — Lets you control your phone’s sensitivity to spoken voice
commands.
•Names — Lets you control your phone’s sensitivity to spoken names from your
Contact list.
2. Use the navigation keys to highlight an option, then press the key to
select the highlighted option. The selected Sensitivity screen appears in
the display.
3. Use the navigation keys to adjust the selected Sensitivity setting to Reject
More spoken commands or names or to Reject Less spoken commands
or names. Recommended is the setting that works best for most voices
and is the factory default setting.
4. Press the key or the OK (left) soft key ( ) to accept the new
setting.
Choice Lists Settings
VoiceSignal displays choice lists based on your preferences: never if you do not want
them, automatically when it needs help recognizing a spoken name or number, or
always when you specify that it must. When displayed, a choice list contains up to
three possible choices and prompt for you to confirm the correct one.
tuv
tuv
@
ghi
ghi
@
OK
OK
tuv
tuv
@
ghi
ghi
abc
OK
OK