User Manual (ver.F6)

122
1.
In standby mode, press the MENU (left) soft key ( ), then press
(for Settings) and (for Display), and for Banner.
Note: Press and hold to erase an existing banner, if necessary.
2. Enter a word or short phrase to appear in your phone’s display while in
standby mode (Up to 12 characters).
3. Press the key to save the new banner.
Backlight
You can set the backlight for your display or keypad to remain on for a specified
period of time or remain on as long as the folder is open.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press the MENU (left) soft key ( ), then press
(for Settings) and (for Display), and for Backlight. The
following sub-menus appear in the display:
•LCD — Sets the amount of time the backlight for the LCD remains on after a
period of inactivity. Optional settings are 5, 10, and 15 seconds as well as Folder
Open.
•Keypad — Sets the amount of time the backlight for the keypad remains on
after a period inactivity. Optional settings are 5, 10, and 15 seconds as well as
Folder Open.
• Power save — Unless the backlight setting for the LCD has been changed, the
backlight dims after 5 seconds of inactivity, and then turns off after another 5
seconds. With Power save enabled, the backlight for the LCD is always dim and
then turns off after 5 seconds of inactivity.
•Brightness — Sets the brightness of the backlight for the Main LCD and the
Front LCD.
2. Use the navigation keys to highlight a sub-menu.
3. Press the key to enter the highlighted option’s sub-menu and change
settings as desired.
Front Contrast
Set the contrast for the front display to your preference.
1. In standby mode, press the MENU (left) soft key ( ), then press
(for Settings) and (for Display), and for Front Contrast. The
current Front Contrast setting appears in the display.
wxyz
wxyz
@
def
def
BACK
OK
wxyz
wxyz
@
ghi
ghi
OK
wxyz
wxyz
@
jkl