User Manual (ver.F6)

Changing Your Settings 135
Security Settings
Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or
emergency communications.
Remember to always turn your phone on and check for adequate signal strength
before placing a call.
Store Emergency Numbers
1. In standby mode, press the MENU (left) soft key ( ), then press
(for Settings) and for Security. You’re prompted to enter the lock
code.
Tip: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, then press for Emergency #.
3. Press , , or to select from the three entry openings.
4. Enter the emergency number (up to 32 digits in length).
5. Press to save the number that you entered.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number via the keypad.
2. Press to place the call.
Voice Privacy
Voice privacy lets you prevent those you call from seeing your number in their
display when receiving your call. Voice privacy options are Standard and Enhanced.
1. In standby mode, press the MENU (left) soft key ( ), then press
(for Settings) and for Security. You’re prompted to enter the lock
code.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code, the press for Voice Privacy. The following
options listed appear in the display:
•Standard — Voice privacy is disabled.
• Enhanced — Voice privacy is enabled.
3. Use the navigation keys to highlight the Voice Privacy option of your
choice, then press .
wxyz
wxyz
pqrs
def
def
@
abc
def
def
OK
S
E
N
D
wxyz
wxyz
pqrs
ghi
ghi
OK