User Manual (ver.F6)

Two-Touch Dialing

Memory locations 010 through 099 are special Two-Touch dialing locations.

Example: For location number 013, briefly press the key, then press and hold the key until the

name and number appear in the display and the number is dialed.

Three-Touch Dialing

Memory locations 100 through 495 are special Three-Touch dialing locations.

Example: For location number 113, briefly press the key, briefly press the key again, then press

and hold the key until the name and number appear in the display and the number is

dialed.

Pause Dialing From a Contacts Entry

• If you speed dial a contact that contains (two-second) T pause(s) simply wait for

the pauses to pass and the dialing to complete.

• If you speed dial a contact that contains (hard) P pause(s), wait for the appropriate

prompt(s) from the number you are calling (credit card number, bank account

number, and so on) and enter the appropriate response(s).

Making a Call — Voice Dialing

The Alltel Snap mobile phone includes state-of-the-art voice recognition software

that lets you dial numbers using your voice.

Using Voice Dial

Use the Voice Dial command to dial any number stored in your Contacts list by

saying the name of the contact (Name Dialing). You can also use Voice Dial to dial

any valid telephone number, even numbers not stored in your contact list, by

speaking the individual digits in the number (Digit Dialing).

Voice Dialing Tips:

• Wait for the beep before speaking.

• Speak clearly at a normal volume, as if you were talking to someone on the phone.

• When saying a name, say the first name then the last name.

Dialing a Name

To dial a name, do the following:

1. In standby mode, press and hold the key.

“Say a Command” appears in the display and is pronounced through the

earpiece.

def

@ @

def