User manual

introduction
10_ introduction English_11
● INTRODUCTION
COMPONENT NAMES AND FUNCTIONS
Front
ڮڞڪڈڍڎڒڋ
❶
➏
➋
Camera Sunshield
Sunshield adaptor : Fixing the sunshield onto the camera.
Lens
Video Output Terminal to Monitor : Used for monitoring of video output When
camera installation.
Function Setup Switch : Display the menu on the screen and move the cursor
to four directions to confirm status or after changing a
selected item.
Front cover
➊
➋
➌
➍
➎
➏
➍
➎
➌
❶
Power input terminal : Connect the power as specified for each model here.
MD Output Terminal : Motion detection signals are output through this terminal.
RS-485 control terminal : You can control SETUP MENU through this port by using
external controllers like a Remote controller that RS-485
Communication is supported. For details, see page 15.
Video output terminal : Video signals are output through this port. Connect this port
to the Video IN port of a monitor.
➊
➋
➌
➍
Back
➋
➌
➍
Connector Signal Level I/O
MD
There is motion
USER Vcc
There is no motion
0V
5±0.5sec
← →
Output
MD(Motion Detection) Output format is open collector.
M
