High Resolution Weatherproof IR Camera User Manual SCO-3080R
High Resolution Weatherproof IR Camera User Manual Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description.
Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled with water on top of the camera. doing so may cause personal injury due to fire, electric shock, or falling objects. 8. If any unusual smells or smoke come from the unit, stop using the product. in such case, immediately disconnect the power source and contact the service center. continued use in such a condition may cause fire or electric shock. 9.
Safety information fCC sTATemeNT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules.
Important safety instructions Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.
Contents INTRODUCTION 9 10 11 13 Features What’s included Component names and Functions Adjust the lens's zoom and focus CONNECTION 14 14 15 16 Connecting to Monitor Connecting to Power Function jack Using coaxial communications SETUP 18 18 Menu Configration Menu Setup TROUBLESHOOTING 36 Troubleshooting SPECIFICATIONS 37 39 Specifications Dimension 9 14 18 36 37 8_ Contents
Introduction FEATURES y Ultra High Resolution By adopting a diagonal 6mm (1/3”) 520K pixel (NTSC), 610K pixel (PAL) Color Double Density CCD, the camera produces clear picture quality with a horizontal resolution of 650 TV lines for color and 700 TV lines for BW. y SSNR3 (Samsung Super Noise Reduction) Function The high-performance SV-V DSP chip effectively removes low-light gain noise and afterimage to provide clear images even in dark environments.
Introduction y Miscellaneous Functions HLC(High Light Compensation), SENS-UP, H/V-REV, D-ZOOM, SHARPNESS, MOTION DETECTION and PRIVACY functions are provided. y OSD The camera control is convenient by using 17 different foreign language O.S.D.
COMPONENT NAMES AND FUNCTIONS Front ● INTRODUCTION 2 ❶ 3 ➍ ➎ ➐ ➏ ❶ Camera Sunshield ➋ Sunshield adaptor : Fixing the sunshield onto the camera. ➌ Focus lever : Set focus of lens by turn the focus lever. ➍ Zoom lever : Set zoom magnification of lens by turn the zoom lever. ➎ Front cover ➏ Function Setup Switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item.
Introduction Back ❿ ➒ ➑ ➑ Function jack : It contains RS-485 communication jack, MD-OUT and GND. ➒ Video output jack : Video signals are output through this port. Connect this port to the Video IN port of a monitor. ❿ Power input terminal : Connect the power as specified for each model here.
ADJUST THE LENS'S ZOOM AND FOCUS 1. Remove the sunshield from the camera. 2. Remove the front cover from the camera by turning it counterclockwise. 4. Adjust the zoom & focus by moving the lever counterclockwise for (NEAR & TELE) and clockwise for (WIDE & FAR) position. 5. After adjustment, tighten the zoom or focus levers, taking care not to adjust the zoom/focus position. 6. Please, close and tighten the front cover. 7. Replace the sunshield.
Connection CONNECTING TO MONITOR Please connect the Video output jack located on the back of the camera to the monitor. Monitor CCD Camera y The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument. y Please turn off the power when connecting. CONNECTING TO POWER The recommended adaptor specification for SCO-3080RN/P is DC 12V/4A , AC 24V/2A over. Please check the standard power requirement before connecting the power.
Connection When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #28 #26 #24 #22 #20 #18 (0.08mm2) (0.13mm2) (0.22mm2) (0.33mm2) (0.52mm2) (0.83mm2) 0.213 0.134 0.078 0.050 0.030 0.018 0.077 0.048 0.028 0.018 0.011 0.006 y As shown in the table above, voltage decreases as the wire gets longer. Therefore, the use of an excessively long power cable to the camera may affect the camera’s performance.
Connection (1) Connection to a PC. Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable. EX) SERIAL PORT OF THE PC(COM1) SERIAL CABLE RS-485 CONVERTER RS-485 CONTROL CABLE (2) Connection to a DVR or System Controller. Connect the RS-485 cable to the connection ports of the DVR or System Controller. 485 Control Board Connection Port RS-485 Control Port (+) CONNECTION TERMINAL (-) CONNECTION TERMINAL (TRX+) (TRX-) ½ RS-485 Communication establishment initial value.
DVR ALARM HDD NETWORK BACKUP REC REC 1 DVD RECORDER 2 3 7 4 5 6 9 10 11 12 13 14 15 16 8 OPEN/CLOSE ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW MODE AUDIO ALRAM PRESET MENU USB RETURN MENU PRESET MON GROUP PTZ DVR TRACK MTX 2 3 SETUP 4 7 FUNC 5 8 ESC 9 ENTER CLOSE OPEN 0 NEAR FAR WIDE TELE : BNC • • ---- : RS-485 - Video Cable The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera a
Setup MENU CONFIGRATION MAIN SETUP LENS ● DC EXPOSURE ● BRIGHTNESS ● SENS-UP ● SHUTTER ● RETURN ● AGC WHITE BALANCE ● ATW ● MANUAL ● OUTDOOR ● AWC→SET ● INDOOR BACKLIGHT ● OFF ● SSDR ● USER BLC ● WDR ● HLC ● OFF SSNR3 ● ON DAY/NIGHT ● AUTO ● COLOR ● B/W PROFILE ● BASIC ● ITS ● DAY/NIGHT ● INDOOR ● BACKLIGHT ● USER SPECIAL ● IMAGE ADJ ● INTELLIGENCE ● LANGUAGE ● CAM TITLE ● PRIVACY ● COMM ADJ ● SYNC ● DIS ● RETURN EXIT ● SAVE ● NOT SAVE ● RESET MENU SETUP Use the Function Set
Select the function using the Function Setup switch. DC ATW OFF ON AUTO BASIC Change the status using the Function Setup switch. ● SETUP MAIN SETUP 䯝 1.LENS 2.EXPOSURE 3.WHITE BAL 4.BACKLIGHT 5.SSNR3 6.DAY/NIGHT 7. PROFILE 8.SPECIAL 9.EXIT SAVE 2. Select a desired function using the Function Setup switch. y Place the cursor over a desired item. 3. Set up a selected item by using the Function Setup switch. 4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
Setup EXPOSURE 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch so that the arrow indicates 'EXPOSURE'. MAIN SETUP 1.LENS 䯝 2.EXPOSURE 3.WHITE BAL DC ATW 2. Select a desired mode using the Function Setup switch. y BRIGHTNESS : Adjusts the video brightness. EXPOSURE SETUP y SHUTTER : You can select either auto or 䯝 1.BRIGHTNESS IIIIIÂIIIIIIIIIIIIIIII 25 manual shutter. --2.SHUTTER - ESC : Select this to control the shutter 3.AGC HIGH speed automatically.
WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch so that the arrow indicates ‘White Bal’. 2. Select a desired mode using the Function Setup switch. MAIN SETUP 1.LENS 2.EXPOSURE 䯝 3.WHITE BAL 4.BACKLIGHT DC ATW OFF ※ Select one of the following 5 modes, as appropriate for your purpose. y ATW : Select this when the color temperature is between 1,700°K and 11,000°K.
Setup White Balance may not work properly under the following conditions.In this case select the AWC mode. 1 When the color temperature of the environment surrounding the subject is out of the control range (e.g. clear sky or sunset). 2 When the ambient illumination of the subject is dim. ➌ If the camera is directed towards a fluorescent light or is installed in a place where illumination changes dramatically, the White Balance operation may become unstable.
- MASK COLOR/TONE : Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta) - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. ssDR(samsung super Dynamic Range) : SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall ▶LEVEL brightness of images with high contrast between bright and dark areas.
Setup < WDR ON > < WDR OFF > M Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. In a dark environment, the HLC is only activated when a high light that is larger than a certain area is present. The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY mode).
You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'. When adjusting the noise reduction level of the SSNR3 mode, remember that the higher the level set, the more the noise level will be reduced but that after image may also o ccur. ● SETUP DAY/NIGHT You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down buttons so that the arrow indicates ‘DAY/NIGHT’. 2.
Setup y COLOR : The picture is always displayed in color. y B/W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. - BURST MODE : You can turn on or off the BW MODE SETUP burst signal on B/W mode. ON ▶ 1. BURST MODE - IR Mode : When IR LED is turned on 2. IR MODE ON in B/W, the objects can be 3. RETURN clearly identified due to the function that decreases screen saturation of objects within a short distance.
USER : Automatically configures the camera to your custom settings. 1) Select Custom for Simple Setup mode. 2) Configure the menu options to your custom settings. 3) The settings are automatically saved as Custom mode. SHUTTER AGC WHITE BAL BACKLIGHT SSNR3 DAY/NIGHT BASIC --HIGH ATW OFF/--ON AUTO ITS DAY/NIGHT BACKLIGHT ----MANUAL(1/250) HIGH HIGH HIGH ATW ATW OUTDOOR OFF/--- USER BLC/--- OFF/--ON ON ON AUTO AUTO AUTO INDOOR A.
Setup SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. 2. Select a desired mode using the Function Setup switch. ImAGe ADJ : 1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the Function Setup switch so that the arrow indicates ’IMAGE ADJ‘. 2) Select a desired mode using the Function Setup switch. - monitor : Please change the settings value of video appropriate to your monitor.
- USER : Please use this menu item when using a monitor other than standard ones. You can change the gamma, PED level and color gain in the sub menus. ReVeRse: You can reverse the picture. - OFF : You don’t reverse the picture. - H-REV : You can flip the picture horizontally on the screen. - V-REV : You can flip the picture vertically on the screen. - HV-REV : You can flip the picture horizontally and vertically on the screen.
Setup CAm TITle : If you enter a title, the title will appear on the monitor. 1 If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates ‘CAM TITLE’. 2 Set it to ‘ON’ by using the Function Setup switch. ➌ Press the Function Setup switch. CAMERA TITLE SETUP A B C N O P a b c n o p - .
- INT : Internal Synchronization Type - LL : Power Synchronization Type, Line-lock Press the Function Setup switch. You can select a desired phase from 0 to 359 when select ‘phase’. synchronization. When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode. If the VPS is set to ON, synchronization is fixed to INT. INTellIGeNCe: Commands the camera to motion-detect and trace an object. - MOTION : Select motion types to INTELLIGENCE detect. ▶ 1.MOTION OFF OFF : Not being used. 2.
Setup ·DIR2 : Detects objects moving right to left on the fence line. ·DIR1/2 : Detects all objects moving crosswise on the fence line. - RETURN : Select this to save the POSITION menu settings and return to the TRACKING menu. 2) AREA FENCE - SEL POS : Selects a position from POS1 ~ POS4. - X POS / Y POS : Adjust the size and position of the selected area fence. - DIRECTION ·IN : Detects objects entering the fenced area.
pRIVACy : Mask an area you want to hide on the screen. 1 When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates ‘PRIVACY’. 2 Set up the mode using the Function Setup switch. PRIVACY AREA SETUP ▶ 1.AREA AREA1 2.MODE OFF 3.MASK COLOR GREEN 4.TRANSPARENCY OFF 5.SEL POS L_TOP IIIIIIIIIIIIIIIIIIIII 10 6.XPOS IIIIIIIIIIIIIIIIIIIII 10 7.YPOS 8.RETURN - AREA: You can select up to 12 PRIVACY areas.
Setup DIs (Digital Image stabilizer) : This function mitigates any picture movement due to external factors such as wind. As the DIS function uses the digital zoom the camera's resolution will decrease. DIS doesn’t operate when background illumination is too low. DIS doesn’t operate when object pattern is monotonic as like sky or white wall. lANGUAGe : You can select the menu language according to your requirements.
- COAX : Specify the use of coaxial communications. If you encounter an error due to noise from the DVR, you can set the sensitivity level of the sub menu item to "Low" in an attempt to prevent the error.Then, you must press the MENU/ENTER (OSD KEY) button twice in a row to access the OSD menu. EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. SAVE : Save the current settings and exit the MAIN SETUP menu.
Troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. PROBLEM SOLUTION Nothing appears on the screen. ▶ Check that the power cord and line connection between the camera and monitor are fixed properly. ▶ Check that you have properly connected VIDEO cable to the camera VIDEO output jack. The image on the screen is dim.
Specifications SPECIFICATIONS SCO-3080RN SCO-3080RP Video 1/3” Super HAD CCD II (Double Scan) Total Pixels 1028(H) x 508(V) 1028(H) x 596(V) Effective Pixels 976(H) x 494(V) 976(H) x 582(V) Scanning System 2:1 Interlace Synchronization Internal / Line Lock Frequency H : 15.734KHz V:59.94Hz Horizontal Resolution Color : 650 TV lines, B/W : 700 TV lines Min. Illumination Color : 0.15Lux @ F1.2 (50IRE), 0.
SCO-3080RN SCO-3080RP intelligent Video Fixed_Moved, Fence, Tacking, Detection, Counting Profile Basic, Day & Night, Backlight, ITS, Indoor, User Digital Image Stabilization Off / On VPS Off / On Privacy Masking Off / On (12 programmable zones) Sens-up (Frame Integration) 2x ~ 512x Gain Control Off / Low / High White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700K° ~ 11,000K°) 1/50 ~ 1/120,000 sec Electronic Shutter Speed 1/60 ~ 1/120,000 sec Digital Zoom Off / On (1x ~ 16x) Revers
DImeNsION Unit : mm (Inches) ● SPECIFICATIONS 304.6 (11.99'') 187 158 (6.22'') 128.6 (5.06'') 286.6 (11.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.