User guide

SPEED DOME CAMERA User Guide
50
SPEED DOME CAMERA User Guide
51
Functional Description
9. Others
 ▶
Main Menu/Camera Setting/Others
Sync
:
- INTERNAL : Synchronizes the camera’s output timing to
the internal crystal.
- LINE LOCK: Synchronizes the camera’s output timing to
the AC adapter power to synchronize multiple
cameras. This option is useful when using a
switch such as Matrix Switcher.
- LINE LOCK PHASE : Enables setting the adapter’s
synchronization phase between 0 and
360°.
Image Adj
:
- Sharpness : Sharpens outlines of an image.
- Color : Adjusts the color density of an image.
Freeze
: Stops or reanimates an image.
➡
Others
Sync INTERNAL
Image Adj
Freeze OFF
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light BLC
AGC HIGH
SSNR MEDIUM
SSDR
Day/Night
Others
➡
➡
➡
Preset Setting
Preset = 001 (255)
This function enables the memorization of a selected location
and activates the Pan, Tilt, and Zoom functions at that location.
Saved locations can be recalled using the Preset Execute
command.
Setting Up Preset Numbers
:
Selecting the Preset Setting menu brings up a screen as
shown below. Move the joystick in all four directions to
select the desired number.
Saving Preset Locations
:
Selecting a preset number and pressing the Enter key
redirects the menu to the screen shown below.
Using the joystick, adjust the location of the Pan and Tilt
functions and then set the Zoom and Focus command.
In Preset Settings, the Zoom and Focus command is
controllable only by the Zoom command. To switch
between Zoom and Focus, use the Preset 1 and 2
commands as shown below.
Preset Setting
1+PST:ZOOM 2+PST:FOCUS
Use W/T Preset
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Preset
Setting
Edit
Home Position OFF
Execute
Clear
Status
Sequence Setting
10. Preset
10.1 Preset Location Saving
 ▶
Main Menu/Sequence Setting/Preset/Setting
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status