User guide

SPEED DOME CAMERA User Guide
52
SPEED DOME CAMERA User Guide
53
Functional Description
You can edit the 13 preset items such as Pan/Tilt location,
Zoom and Focus, which are selected among camera functions.
PTZ
:
Recalls saved locations using the Preset Settings command.
Focus Mode
:
Refer to the section entitled Setting Up Your Camera.
Brightness
:
Refer to the section entitled Setting Up Your Camera.
Iris
:
Refer to the section entitled Setting Up Your Camera.
Backlight
:
Refer to the section entitled Setting Up Your Camera.
Day/Night
:
Refer to the section entitled Setting Up Your Camera.
Motion Det.
:
Commands the camera to perform Motion Detection after
it arrives at a selected preset location.
Scene Adj
:
Enables setting the Shutter, AGC, SSNR, SSDR, Sens-Up,
White Balance, and for more information about interface
terminology, please refer to the section entitled Setting Up
Your Camera.
10.2 Preset Edit
 ▶
Main Menu/Sequence Setting/Preset/Edit
Sequence Setting
Preset
Swing SEQ
Group SEQ
....
Main Menu
Camera Setting
Sequence Setting
....
➡
➡
➡
Preset Edit
Preset = 001* (1~255)
Preset Edit [001]
PTZ 271/045/1X
Focus ONE SHOT AF
Brightness 050
Iris AUTO
Back Light
Day & Night B/W
Motion Det. OFF
Scene Adj.
➡
Preset
Setting
Edit
Home Position OFF
Execute
Clear
Status
10.3 Preset Name Setting
 ▶
Main Menu/OSD Setting/Preset Name/Edit
Using this function, you can add names to preset locations.
up to 12 characters.
Once a name is entered, use the joystick and the Enter key to
perform the Set command and save the name.
OSD Setting
Camera ID ON
Camera Name
Preset Number ON
Preset Name
....
➡
Preset Name
ON/OFF OFF
Edit
➡
➡
➡
Preset Edit
Preset = 001* (1~255)
PSET Name[ ]
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
1234567890 ()
[]-/#*!?,.
BACK SPACE CLR SET
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status