User guide

SPEED DOME CAMERA User Guide
56
SPEED DOME CAMERA User Guide
57
Functional Description
➡
Group SEQ
Group 1
Group 2
Group 3
Group 4
....
Group SEQ 1
Setting
Execute
Clear
➡
12. Group SEQ
 ▶
Main Menu/Sequence Setting/Group SEQ
Selecting Group SEQ recalls a group of multiple preset
locations in a consecutive manner. A group can contain up to
255 preset locations.
Setting
:
Using the joystick, enter desired preset numbers into the
PSET section. DWT indicates the camera’s duration of stay
at a preset location. SPD shows the camera’s movement
speed by 64 different levels.
Execute
:
Executes the group operation.
Clear
:
Deletes the selected group.
Group SEQ 1
NO PSET DWT(s) SPD
001 *** 003 64
002 *** 003 64
003 *** 003 64
004 *** 003 64
005 *** 003 64
006 *** 003 64
007 *** 003 64
➡
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Tour SEQ
Setting
Execute
Clear
➡
13. Tour SEQ
 ▶
Main Menu/Sequence Setting/Tour SEQ
Selecting Tour SEQ recalls groups of preset locations in a
consecutive manner. Up to 6 groups can be listed for this
function.
Settings
:
Selecting the Settings menu brings up the following screen.
Using the joystick, you can enter desired group numbers to
the Group section. DWT indicates the camera’s standby
time before a new group is recalled.
Execute
:
Executes the group operation.
Clear
:
Deletes the selected group.
Tour SEQ
NO Group DWT(s)
01 * 003
02 * 003
03 * 003
04 * 003
05 * 003
06 * 003
➡
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status