User guide

SPEED DOME CAMERA User Guide
60
SPEED DOME CAMERA User Guide
61
Schedule Set
Sunday ON
Monday OFF
Tuesday OFF
Wednesday OFF
Thursday OFF
Friday OFF
Saturday OFF
Functional Description

Select Day :
At Auto Run, select SCHEDULE to set up each day of the
week, as shown on the side picture. Select a day, change to
ON, and then press Enter.

Select Time :
When turning ON a day, a timetable appears as shown on the
side picture. (Up to 6 timelines can be selected for a day.)
Select the beginning time and sequencing action to schedule
the action.
16. Schedule
Schedule enables you to schedule a sequencing action by day and time.
Schedule Set
No START SEQ No
1 09:00 HOME
2 00:00 OFF
3 00:00 OFF
4 00:00 OFF
5 00:00 OFF
6 00:00 OFF
Clear
➡
➡
•  Auto mode is disabled when AGC is turned OFF. This function is only available when Color
or B/W mode is selected. The camera time must be setup properly prior to using this
option. If the camera does not perform a scheduled sequencing action, please reconfigure
the camera time under OSD Setting > Others > Clock Setting (Refer to Page 71).
Notes
Auto Run
Mode SCHEDULE
Time 30 SEC
17. Power On Resume and MD Dwell Time
 ▶
Main Menu/Sequence Setting
Power On Resume
:
This is useful when the power is disconnected and
reconnected due to power failures or other power
interruptions.
If the camera was performing a sequence action prior to a
power disconnection, the camera automatically resumes
the action when the power is reconnected.
➡
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
•  'Power On Resume' cannot resume a sequence action if the camera’s internal battery is
completely discharged after the camera was left without power supply for a long time.
(The data of the sequence action, however, remains safe even if the internal battery is
completely discharged.)
Notes
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status