User guide

SPEED DOME CAMERA User Guide
78
SPEED DOME CAMERA User Guide
79
Functional Description
31. Password setting
▶
Main Menu/Password setting
The Password feature enables you to configure a
password for rebooting the camera and accessing the
OSD and preventing unauthorized modification of
existing camera settings.

ON/OFF
:
Enables or disables Password protection.

Edit Password
:
- Change the password; enter the current password and
then a new one, consisting of 4 hexadecimal characters
(0~F).
Password Setting
On/Off OFF
Edit Password
Modify Password
Old Pwd:0 * * *
New Pwd:* * * *
➡
➡
Password setting
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
* The default password is "0000".
•Uponusing"FactoryDefaultSet"at"MainMenu>Initialize,"thepasswordisresettothe
default,"0000".
Notes
Status
Camera Status
CAM MODEL = 12N
CAM VERSION = V1.3
DOME VERSION = V1.00
COAX VERSION = V1.00
CON PROTOCOL = SAMSUNG TW
DOME ID = 001
CONTROLLER = Simplex-9600
➡
32. Status
 ▶
Main Menu/Status
Displays the settings and version of the dome camera.
Cam Model
:
Indicates the model name of the camera.
Cam Version
:
Indicates the software version of the camera.
Dome Version
:
Indicates the version of the camera control board.
COAX VERSION :
Indicates the software version of the Coax communication.
CON Protocol
:
Indicates the status of the current protocol.
Dome ID
:
Camera ID
Controller
:
Indicates the settings of the current communications mode.
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status