User guide

SPEED DOME CAMERA User Guide
8
SPEED DOME CAMERA User Guide
9
Do not install on your own.
Do not handle the power plug
with wet hands.
Do not disassemble the camera or
insert foreign subjects.
Stop using the camera if smoke or
abnormal heat is detected.
Do not install on an unsubstantial wall
that may be subject to vibrations.
Do not install in high humidity or in a
place that may be exposed to oil or gas.
This installation should be made by a qualified service
person. Installing this product on your own may result in
fire or electric shock. For the installation service, contact
the retail shop where you bought the product.
May cause product malfunctions, electric shocks, and fire.
May cause electric shock. May cause fire and damage to the product.
May cause the product to fall.
May cause fire.
Warnings
May cause product malfunctions.
The lens is the most important component of the camera.
Be careful not to smear it with fingerprints.
This product is designed to be used indoors. Outdoor use may
allow water to enter the product and cause malfunctions.
May cause critical damage to the CCD.
Only use in the temperature range of between -10ºC and
+50ºC to prevent low graphics quality and product
malfunction. When using in high temperature conditions,
provide good ventilation.
Severe lighting changes or flickering may hinder normal
camera operation.
Do not install under extreme
temperature conditions.
Do not drop the camera or subject
it to physical shock.
Never keep the camera facing direct
sunlight or any other strong lights.
Do not install under unstable
lighting conditions.
Avoid touching the camera lens.
Do not install in a place that may be
exposed to rain, water, or radioactivity.
Cautions
Warnings & Cautions