User manual

English - 11
● SETTING UP AUTO TRACK
Auto Tracking Using Group Command
PSET : Using the joystick, enter a preset number under
which [After Act.] menu is set to [TRACK].
DWT : Indicates the camera time spent at each preset
location. (1 ~ 120sec)
SPD : Adjusts the camera movement speed by 64 different
levels.
Start
Group SEQ
[Auto Release]
(10sec~5min)
[Preset 1] [Preset 2] [Preset N]
Start
Tracking
Next
Preset
Last
Preset
Finish
Tracking
[ Lost Mode ]
Performed only for the Auto
Release Duration
[ Auto Return ]
(1sec~5min)
<Group SEQ Timing Chart>
When Group SEQ is activated, the camera starts auto tracking at the [Preset 1] location. For
the set DWT duration, the camera performs Auto Track according to [Auto Release] and [Auto
Return] settings. If no movement is detected, it moves to [Preset 2] and repeats the procedures.
AUTO TRACKING USING TARGET LOCK
Setting Target Lock
Target Lock => [ON]
When Target Lock is turned [ON], a red box appears in the
center of the screen.
Target Lock
Using the joystick, move the red box to encircle an object and
then press [Enter] to start Auto Tracking the object.
5.
z
z
z
z
1.
z
-
2.
z
Group SEQ 1
NO PSET DWT(s) SPD
001: *** : 003 : 64
002: *** : 003 : 64
003: *** : 003 : 64
004: *** : 003 : 64
005: *** : 003 : 64
006: *** : 003 : 64
007: *** : 003 : 64
Others
Zone Setting
Indicator OFF
Target Lock OFF
P:234 T:5 1x