User manual

English - 33
● CONNECTION & INSTALLATION
PREPARING ADAPTER AND CABLES
Power Adapter
Power adapter has the capacity of AC24V 2.5A.
Video Cable
The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below :
If the distance between the camera and the monitor exceeds the recommended maximum, please use
an auxiliary video amp.
If the camera is controlled through coaxial communication, please use a video amp intended for coaxial communications.
Regular video amps do not transfer coaxial signals.
Communications Cable
For the camera to communicate with the controller, a
RS-485/422 communications line is required. To ensure the
quality of long distance communication and the accuracy of the
overall communication it is recommended using a twisted pair
cable such as UTP.
Depending on the camera’s environment, the communications distance may vary.
Neither the video nor communications cable is enclosed with the camera.
y
y
M

y
M


Distance
Recommended Cable
Specification
300m 4C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)