User manual

English - 49
● SETUP
Exposure
The Exposure settings are to control the camera’s exposure meter.
Brightness : Adjusts the screen brightness.
(Over 50: Brighter, Under 50: Darker)
Iris
AUTO : Automatically adjusts the exposure meter.
MANUAL : Enables manual adjustment of the exposure meter.
(F1.6~Close: 18 levels)
Shutter : Controls the camera’s electronic shutter.
--- : The shutter speed is fi xed at 1/60 for NTSC and 1/50 for
PAL. Operates when Iris is on the Auto Mode.
ESC : Adjusts the shutter speed automatically according to
the screen brightness. Operates when Iris is on the
Manual Mode.
A.FLK : Select this setting when you experience picture
fl ickering. Flickering can happen when artifi cial lighting
frequencies clash with camera frame rates.
MANUAL : Enables manual adjustment of the shutter speed.
Sens-Up
AUTO : Automatically detects light levels and maintains a clear
picture at night or under low-light conditions.
Sens-Up Limit : Adjusts to the maximum-powered zoom per
frame.
For optimal performance of the A.FLK mode, avoid using the mode in conjunction
with Backlight.
While the Internal Sync mode is in effect, setting the shutter to ‘---’ and facing the
camera directly to a bright light source may cause poor camera performance.
Sens-Up is disabled when the shutter is in Manual or A. FLK mode.
z
z
-
-
z
-
-
-
-
z
-
-
M



Camera Setting
Zoom/Focus
White Balance AUTO
Exposure
Back Light OFF
AGC High
SSNR Medium
SSDR
Day & Night
Others
Æ
Æ
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Password Setting
Status
Exposure
Brightness 050
Iris AUTO
Shutter ---
Sens-Up AUTO