High Resolution Vandal Dome Camera User Manual SCV-2080
B v d High Resolution Vandal Dome Camera User Manual Copyright ©2009 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall reserve the copyright of this document.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description.
• • • The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. • • The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Contents Contents • Features ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ • Precautions ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ • Components and Accessories ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ngle tude • Overview ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ • Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ■ Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ■ Adjusting the monitoring direction of the camera ÄÄÄÄÄÄÄÄÄÄÄÄÄ ■ Optional Accessories for Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ he ) • Connection ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ■ Connecting
Features Contents IP66 Approved/Dust and Rain Resistant Motion Detection With dust and rain resistant design, the camera can be installed outside under building eaves or places that are exposed to the dust and rain. Since the camera detects motion without any additional external sensor, you can monitor activity more efficient.
Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Warnings & Cautions This information is provided to ensure your safety and to prevent any losses, financial or otherwise.
Precautions Do not install under extreme temperature conditions. Do not install in high humidity environment. Use only under temperature conditions between -50°C and +50°C. Provide good ventilation when using in high temperature conditions. May lower image quality. Do not install under unstable lighting conditions. Avoid touching the camera lens. The lens is the most important component of the camera. Be careful not to smear it with fingerprints.
Do not expose the camera to radioactivity. Notes • Exposure to a spotlight or an object emitting strong light may cause smear or blooming. • Ensure that the power source complies with normal specifications before supplying it to the camera.
Components and Accessories ❶ ➌ ➋ High Resolution Vandal Dome Camera SCV-2080 User Manual SCV-2080 Series Quick Install Guide SCV-2080 The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Overview ➋ ❾ ➌ ❽ ➊ ❿ ⓫ ➏ ➎ ➍ ➐ ❶ Pan Base : Control panning angle of camera. ➋ Rotate Base : Control rotating angle of camera. ➌ x3.6 Vari-focal Lens Module 2.8 ~ 10.0mm (F1.2) ➍ Video Output Terminal to Monitor ➎ Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or changing a selected item.
Installation Installation Disassembling 1 1) Using the L-wrench provided, loosen 3 screws by turning them counterclockwise and separate the dome cover. Dome Cover 2 2) Lift up the inner cover while gently pressing both ends to separate it from the unit. Inner cover 3 3) Loosen 3 screws by turning them counterclockwise, press both left and right lock releases inwards (in arrow direction) to unlock the stopper, and then separate the camera from the case.
Installing the camera on a ceiling or wall 1) Affix the mounting template(supplied) to the mounting surface. 2) Drill holes (diameter 5mm, more than 35mm deep) on the ceiling by matching to the holes on the case bed, and insert plastic anchors (HUD 5) fully into the holes. Fix the case bed on the ceiling by using Tapping Screws (TH M4xL30).
Installation Installing the camera on a ceiling or wall with pipeline Hole for 3/4° pipe (JIS B 0202-1966) 1) Secure the mounting bracket on the place you want to mount it after combining the mounting bracket with the pipeline. 1 2 3 2) Connect power input and video output cables with the each cable from pipeline. Ø5 tapping screw x 4 (supplied) 3) Secure the main body on mounting bracket.
3FJOTUBMM UIF EPNF DPWFS UP UIF NBJO CPEZ e 1) Adjust the lens in a desired direction. 2) Secure the inner cover to the main unit. 3) Assemble the Dome Cover. For waterproof purpose, fix and secure the bolt using L-wrench provided.
Installation "EKVTUJOH UIF NPOJUPSJOH EJSFDUJPO PG UIF DBNFSB Panning 0˚ Tilting F Lens rotation 60˚ ~ 80˚ 1) 1) You can adjust the camera direction only when the camera is fixed on the ceiling. Then, turning the camera to the left or right is referred to as "Panning", while moving the camera angle up or down is "Tilting". For panning, the panning limit is 220° for the clockwise, and 135° for the counter-clockwise, a total of 355° enabled; further rotation is prevented by the stopper.
• The case of ceiling installation ➊ After mounting the camera on the ceiling, adjust the panning angle according to the monitoring direction. You should adjust the panning angle lest that the video be displayed upside down on the monitor. ➋ Adjust the Rotate position to fit the video to the screen borders. ➌ Then, adjust the tilting angle so that the camera faces the monitoring direction. Notes • For smoother Rotate adjustment, set the Tilt position between 60˚ ~ 80˚.
Installation 3) POLE MOUNT ADAPTOR(SCX-300PM) This is an adaptor for WALL MOUNT ADAPTOR (SCX-300WM) installation on a pole whose diameter is bigger than 80mm. C O D 4) CORNER MOUNT ADAPTOR (SCX-300KM) This is an adaptor for WALL MOUNT ADAPTOR (SCX-300WM) installation on the corner of wall joint. W • Connection * $POOFDUJOH UP .POJUPS Connect the Video Output jack to the VIDEO-IN jack of monitor.
Connection Connecting to Power Connect the adaptor to the power input terminal as shown in the figure below. Output of the adaptor should be either one of AC 24 V, 1.5 A or DC 12 V, 1.0 A. Note that using DC 12 V may cause lower heater temperature. ---- Power Input Terminal When the resistance value of copper wire is at [20˚C(68˚F)] #24(0.22mm2) #22(0.33mm2) #20(0.52mm2) #18(0.83mm2) Resistance (Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.
Connection Using Coaxial Communications • Coaxial Communications System • OSD Control method CAMERA SET UP DOWN LEFT RIGHT DVR MENU/ENTER UP KEY DOWN KEY LEFT KEY RIGHT KEY CONTROLLER OSD KEY JOYSTICK UP JOYSTICK DOWN JOYSTICK LEFT JOYSTICK RIGHT DVR DVD : BNC • • ---- : RS-485 • Video Cable The camera's video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video a
Operating Your Camera Menu Configuration MAIN SETUP LENS úDC EXPOSURE úBRIGHTNESS úSENS-UP úSHUTTER úRETURN úAGC WHITE BAL úATW úMANUAL úOUTDOOR úAWC ¬ SET úINDOOR SSDR úOFF úON BACKLIGHT úOFF úBLC SSNR3 úOFF úON DAY/NIGHT úCOLOR úB/W SPECIAL úIMAGE ADJ úSYNC úDIS úMONITOR úCAM TITLE úMOTION DET úPRIVACY úLANGUAGE úRETURN EXIT úSAVE úNOT SAVE s COLOR DOME CAMERA 21 SCV-2080 úHLC úAUTO úRESET
Operating Your Camera Menu Setup Use the Function Setup switch within the camera. Function Setup switch U 1 2 1. Press the Function Setup switch. • Main SETUP menu is displayed on the monitor screen. Select the function using the Function Setup switch. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.BACKLIGHT OFF 6.SSNR3 ON 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Change the status using the Function Setup switch. 2. Select a desired function using the Function Setup switch.
Notes • An item with the icon also has sub menus. To select a sub menu, select an item with the icon and press the Function Setup switch. • An item with the --- icon is unavailable due to function settings. LENS Using this function, you can control the screen brightness. 1. When the SETUP menu screen is displayed, select ‘LENS’ by using the Function Setup switch so that the arrow indicates ‘LENS’. 2. The Lens mode has sub menu site as listed below. - BRIGHTNESS : Adjusts the video brightness.
Operating Your Camera EXPOSURE SETUP 1.BRIGHTNESS 25 2.SHUTTER --3.AGC HIGH 4.SENS-UP OFF 5.RETURN BRIGHTNESS : Adjusts the video brightness. SHUTTER : You can select the shutter. - --: Shutter speed is fixed at 1/60 sec (1/50 sec). - ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter speed is automatically controlled depending on the ambient illumination of the subject. - MANUAL : You can control shutter speed manually.
c) Notes • If you set the Function Setup switch to ‘AUTO’ mode, You can adjust the brightness by increasing or decreasing the shutter speed. (x2 ~ x512) • Note that the higher the zoom level, the brighter the screen, but the more likely it is that an after-image will appear. • Although Noise, Spots and Whitish symptoms may occur in SENS-UP operation when the zoom level is increased, this is normal. RETURN : Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
Operating Your Camera AWC ĄSET : To find the optimal luminance level for the current environment, point the camera towards a sheet of white paper and press the Function Setup switch. If the environment changes, readjust it. Notes • White Balance may not work properly under the following conditions. In this case select the OUTDOOR mode. ❶ When the color temperature of the environment surrounding the subject is out of the control range (e.g. clear sky or sunset).
e SSDR ON SSDR OFF BACKLIGHT Unlike conventional cameras, the SCV-2080 is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary W-V DSP chip. 1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function Setup switch so that the arrow indicates ‘BACKLIGHT’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.BACKLIGHT OFF 6.SSNR3 ON 2.
Operating Your Camera HLC (High Light Compensation) : If the scene contains extremely bright light areas such as; from car headlight, the light can mask out much of the on-screen detail. - LEVEL : Adjusts the brightness level of a monitoring area. - LIMIT : Enable to change the operating condition. - MASK COLOR/TONE : Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta) - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced. Th 1 3.
SSNR3 This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function Setup switch so that the arrow indicates ‘SSNR3’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.BACKLIGHT OFF 6.SSNR3 ON 7.DAY/NIGHT AUTO 2. Select a desired mode using the Function Setup switch. ON : Activates SSNR3 so that noise is reduced. OFF : Deactivates SSNR3. Noise is not reduced. 3.
Operating Your Camera MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.BACKLIGHT OFF 6.SSNR3 ON 7.DAY/NIGHT AUTO 8.SPECIAL 2. Select a desired mode using the Function Setup switch according to the picture display you want. AUTO : The mode is switched to ’Color‘ in a normal environment, but switches to ’B/W‘ mode when ambient illumination is low. To set up the switching time for AUTO mode, press the Function Setup switch. You can turn on or off the burst signal on B/W mode.
COLOR : The picture is always displayed in color. B/W : The picture is always displayed in black and white. You can turn on or off the burst signal on B/W mode. Notes • When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as selecting 'COLOR' mode and 'AUTO' mode cannot be selected. SPECIAL 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup switch so that the arrow indicates ‘SPECIAL’. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSDR OFF 5.
Operating Your Camera 2. Select a desired mode using the Function Setup switch. 1. 2. 3. 4. 5. 6. 7. 8. 9. IMAGE ADJ : 1) When the SPECIAL menu screen is displayed, select ‘IMAGE ADJ’ by using the Function Setup switch so that the arrow indicates ’IMAGE ADJ‘. 2) Select a desired mode using the Function Setup switch. 1. 2. 3. 4. 5. 6.
• SHARPNESS : As you increase this value, the picture outline becomes stronger and clearer. Adjust this value appropriately depending on the sharpness of the picture. • RETURN : Select this to save the settings for the IMAGE ADJ menu and to return to the SPECIAL menu. Notes • When the V-REV or H-REV mode is enabled, the text on the screen does not flip. • If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.
Operating Your Camera 5) Enter a title, move the cursor to ‘POS’ and press the Function Setup switch. The entered title appears on the screen. Select the position to display the title on the screen by using the Function Setup switch and press the Function Setup switch. When the position is determined, select ‘END’ and press the Function Setup switch to return to the SPECIAL menu. FRONT DOOR Notes • When the CAM TITLE menu is ‘OFF’, no title will be displayed on the monitor screen even if you enter one.
MOTION DET : This product has a feature that allows you to observe movement of objects in 8 different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected. You can monitor activity more efficient. 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates ÌMOTION DETÍ . 2) Set up the mode using the Function Setup switch. - SENSITIVITY : You can select up to 8 MD areas.
Operating Your Camera 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates ‘PRIVACY’. 2) Set up the mode using the Function Setup switch. - AREA : You can select up to 12 PRIVACY areas. - MODE : Determines whether to use the area selected in the AREA. - MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White, Gray. - MASK TONE : Adjust the brightness of MASK COLOR.
so e, EXIT Select a desired EXIT mode using the Function Setup switch depending on the camera purpose. SAVE : Save the current settings and exit the MAIN SETUP menu. NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu. RESET : Resets the camera settings to the factory defaults. Language and Monitor settings are not initialized.
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. úNothing appears on the screen. Ķ Check that the power cord and line connection between the camera and monitor are properly connected. Ķ Check that you have properly connected BNC cable to the camera. úThe image on the screen is dim. Ķ Is lens stained with dirt? Clean your lens with soft, clean cloth.
Specifications SCV-2080N ELECTRICAL Input Voltage Power Consumption VIDEO Imaging Device Total Pixels Effective Pixels Scanning System Synchronization Frequency Horizontal Resolution Min.
Dimension A M M Ø160 E E E M B Y C 134.
DECLARATION OF CONFORMITY Application of Council Directive(s) 2004 / 108 / EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SCV-2080P Beginning Serial NO. C5CX6V3Z300001X Year of Manufacture 2010.03.
MEMO COLOR DOME CAMERA 42 SCV-2080
MEMO COLOR DOME CAMERA 43 SCV-2080
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 www.samsungcctvusa.com www.samsungtechwin.com www.samsungsecurity.com SAMSUNG TECHWIN EUROPE LTD.
