Operation Manual

English _27
● LIVE
Shutting Down the System
You can shut down the system only if you have logged in to the DVR as administrator.
1. Press the [POWER] button on the remote control or
right-click to display the context sensitive menu and select
<Shutdown>.
2. The “Shutdown” confirmation window appears.
3. Use the arrow keys on the remote control to move to
<OK> and press the [ENTER] button or click <OK>.
When “Disconnect the power cable” pops up,
disconnect the power cable and shut off the unit.
M
` For the permission management, refer to “Permission
Management > Setting Permissions”. (Page 45)
Login
To access a DVR or restricted menu, you should have logged in to the DVR.
1. In live mode, right-click any area of the screen.
You will see the context sensitive menu as in the right
figure.
2. Click <Login>.
The login dialog appears.
You can also see the login dialog to access a desired
menu by pressing the [MENU] button on the remote
control.
` The login dialog will also appear if you press a menu button on the
remote control of the DVR when the corresponding menu requires
logging in.
` After logged in, press [RETURN] on the remote control to display the
logout dialog.
` By default, initial ID and password are set to “admin”, and “4321”.
M
` For the restricted permission, refer to “Permission Management > Setting Permissions”. (Page 45)
2013-01-01 01:10:25
Scene Mode

Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Login
2013-01-01 01:10:25
Shutdown
Are you sure to shutdown?
OK Cancel
2013-01-01 01:10:25
Login

ID admin

Password
OK Cancel