Special features Thank you for purchasing this product. This product is a high resolution video presenter that can project all kinds of data on a PC monitor, a TV, or a projector with simple manipulations. 12X zoom lens (can be used for the materials with sizes from near B4 to film) By adopting 12X super optic angle zoom lens, it is possible to shoot all materials from the size of a film to near B4 size.
Features Various image control Digital features on your Digital Presenter provide useful and various image controls including: - Negative/Positive image conversion - Brightness and Red/Blue color control - Image rotation - Image save/recall - Image freeze - Image divide Input source selection You can quickly switch between your computer presentation and your document presentation with the INT/EXT button on the control panel or on the remote controller.
Contents Product features and structure Safety precautions..................................................................5 Uses of digital presenter ........................................................6 Supplied accessories .............................................................7 Names and functions of each part ........................................8 Front side............................................................................8 Main control panel ...................................
Safety precautions Follow these safety instructions when setting up and using your Digital Presenter: 1. Do not place the presenter on an unstable cart, stand, or table 2. Do not use the presenter near water or sources of heat. 3. Use the type of power source indicated on the presenter. If you are not sure of the power available, consult your dealer or power company. 4. Place the presenter near a wall outlet where the plug can be easily unplugged. 5. Take the following precautions for the plug.
Uses of digital presenter Conference Detailed information in a report, form, table, etc. as well as a three dimensional object, such as a model, can be projected on a screen clearly that all the participants can focus on the same topic during a conference. Thus it is very helpful for an effective progress of a conference.
Supplied accessories When you unpack your Digital Presenter, make sure that you have all these components. User's Manual C-Composite cable S-video cable Remote controller Power cable PS/2 Mouse Lens cap PC Monitor cable USB Cable SDP-6500 program etc.
Name and function of each part Front side Digital Presen ter SD P-6500 RO TATE AP ER TU AF RE ZO OM FR EE INT/ ZE LA EX T MP EX AW EX C MOD E SX GA XG A SV GA T1 T2 Dig ital Pre sent er SD P-6 500
Lens Digita l Pres enter SDP6500 Can rotate to the front and back. Main support Main lock button Press to move the main support.
Name and function of each part Main control panel The buttons on the main control panel can be found in the remote controller. These buttons perform the same functions. ROTATE AF IRIS INT/EXT EXT1 EXT2 SXGA XGA APERTURE ZOOM FREEZE LAMP AWC MODE SVGA POWER APERTURE Use this to turn the power on or off. Use this to control the sharpness of the output image. ROTATE Use this to rotate the image by 90˚, 180˚, 270˚, 0˚. FREEZE ZOOM LAMP Use this to freeze the image.
Name and function of each part Terminals at the back POWER INPUT TERMINAL MOUSE Use this to connect the power cable. (100 - 240V, free voltage) Use this to connect PS/2 Mouse. (See page 17.) VGA VIDEO INPUT 1,2 Connect this to the VGA output terminal of another device by supplied PC cable. When external input menu is selected, the image is shown through the VGA out terminal. VGA VIDEO OUTPUT 1,2 Connect this to the RGB input terminal of a PC monitor or a projector by supplied PC cable.
Name and function of each part On the remote controller
POWER ROTATE Turns power on or off. Use this to rotate the image by 90˚, 180˚, 270˚, 0˚. INT/EXT Allows to choose the signal input to be displayed. WIDE/TELE NEGA/POSI • Enlarges the image size. • Reduces the image size. Switches for negative or positive film. IRIS+ / IRISTurns the upper lamps and/or lightbox on or off. • Opens iris to increase the brightness. • Closes iris to decrease the brightness. FOCUS EXIT Allows to focus an object. F: Used to focus an object which is in the far distance.
Set preparation Press the main lock button and raise the main support Raise the lamp unit until it is convenient for use, and set it to the center of the document plate. Digital Presen ter SD P-6500 RO TAT AP ER TU RO TAT E AF AP RE ZO ER TU AF ZO OM FR EE INT ZE LA E RE OM FR /EX EE INT ZE T LA MP EX T1 AW EX T2 C MO DE SX GA XG A SV GA Pre Adjust the angle of the lamps properly.
Connecting to output device TV, PC Monitor or Projector Digital Presenter SDP-650 0 Connect a TV, PC monitor or Projector to this presenter to display the projected image using the AV cables, S-video cable or PC monitor cable.
Connecting to output device Desktop computer Digital Presenter SDP-650 0 ROTAT E AF APER TURE ZOOM FREEZ INT/EX E T LAMP EXT1 EXT2 AWC MODE USB connection RS-232C connection SXGA XGA SVGA Digita l Prese nter SDP6500 For SDP-6500, connect a desktop PC using USB cable and install the supplied SDP-6500 program. You can see the projected image on the PC monitor and control the image as a graphic file using the program. RS-232C connection is available for advanced user.
Connecting to output device Computer Digital Presenter SDP-650 0 If you connect computer through VGA IN port, you can receive video signal from the computer. ROTAT E AF APER TURE ZOOM FREEZ INT/EX E T LAMP EXT1 EXT2 AWC MODE SXGA XGA SVGA Digita l Prese nter SDP6500 Connection PS/2 Mouse If you connect PS/2 mouse through MOUSE port, you can control various function of digital presenter. (See page 28.
Using the presenter To show the image received from external device Set up your digital presenter properly. (See page 14.) Digital Presen ter SDP-6 500 ROT ATE APE AF RTU RE ZOO M FRE INT/ EZE EXT LAM P EXT1 EXT2 AWC MOD E SXG XGA A SVG A Digi tal Pre sen ter SDP -650 0 Connect the input device from which you want to receive the image and the output device in which you want to show the image. (See pages 15 through 17.
Using the presenter Choose the video source with the INT/EXT button of the presenter. IRIS INT/EXT EXT1 EXT2 SXGA XGA LAMP AWC MODE SVGA • Each time you press the button, the display shows EXT1 OUT, EXT2 OUT, INT OUT. • EXT1 OUT, EXT2 OUT View the image from an external VGA output device through a PC monitor or a projector connected to the digital presenter. • INT OUT Choose this mode to show the image through the lens of the digital presenter. Open the image on the computer.
Using the presenter To project an object on the digital presenter Set up your digital presenter properly. (See page 14.) Digital Presen ter SDP-65 00 ROTA TE AF APER TURE ZOO M FREE ZE INT/E XT LAM P EXT1 EXT2 AWC MOD E SXGA XGA SVGA Digi tal Pres ente r SDP -650 0 Connect to a TV, a PC monitor, a projector to display the image. (See page 15.) Turn the power of the output device and the digital presenter on.
Using the presenter Select a proper lighting source with the LAMP button of the presenter. Each time you press the button, upper lamps on, lightbox on, then all lighting off. AF M IRIS LAMP FREEZE Digital Presenter SDP-650 INT/EXT AWC MODE 0 Upper lamp. Use the upper lamps to project paper document and other material, and use lightbox lamp to project transparencies.
Using the presenter Focus on the object. • Auto focus control: Press AF • Manual focus control: press [Focus F] or [Focus N] to adjust. E URE AF ZOOM FREEZE IRIS LAMP AWC You see the image on the TV, the PC monitor or the projector. • To use versatile image control features, see pages 23 through 27.
Adjusting your image Use the control buttons on the remote controller or on the control panel of the presenter to adjust the projected image. Some of the main features are described below: Adjusting image size Press WIDE or TELE button on the remote controller to reduce or enlarge the image size displayed on the screen. You can also use ZOOM or ZOOM button of the presenter to achieve the same result. ZOOM ROTATE APERTURE AF ZOOM L FREEZE Adjusting brightness IRIS Press IRIS image.
Adjusting your image Adjusting image color For automatic color adjustment, press AWC button. If you want fine level adjustment, press BLUE + / - or RED + / - button on the remote controller button to increase or decrease blue or red color factor manually. AF IRIS INT/EXT EXT1 EXT2 SXGA XGA REEZE LAMP AWC MODE SVGA Hint: To obtain the best result, put the camera lens facing the white paper and press AWC button. Positive and negative switching Press NEGA/POSI button.
Adjusting your image Image rotate control For image rotation, press ROTATE button. To rotate the image by 90˚, 180˚, 270˚, 0˚, press ROTATE button ROTATE APERTURE ZOOM FR Saving image in memory You can save the image up to 8 frames into your digital presenter's memory. After saving, you will be able to recall it. To save the image into the memory, press SAVE button and specify the memory location within 4 seconds using the number keys from 1 through 8.
Adjusting your image Screen 2 divide and image shift You can see both the image of an object currently projected and the image saved in memory simultaneously on one screen. Press DIVIDE button and press the memory location number within 4 seconds to recall the image you want to see. To cancel this mode and return to normal mode, press EXIT button. You can see the image of an object currently projected at right side. The recalled image from memory appears at left side.
Adjusting your image Saving custom user setting After you adjust feature value, you can save the value for next time use. You can save up to 4 different custom user settings. (You can save the setting on the Zoom, Focus, Iris, Lamp state and Color level buttons.) To save the current value, press SAVE button and specify the memory location within 4 seconds using the number keys from 1 through 4. To recall your custom setting, press the ACTIVE button and press the memory location number within 4 seconds.
Adjusting your image with GUI SDP-6500 support to GUI menu system to control various function of digital presenter with mouse operation. To use GUI menu system, first of all, mouse device (PS/2 type) must be connected to mouse control terminal, if it is connected with success, mouse pointer will be appeared on the screen. And then, click the right mouse button, GUI main menu is appeared on the screen, and GUI menu system is activated.
Adjusting your image with GUI Focus Allow to focus an object in the far / near distance, or automatically. Holding down [Far]/[Near] menu with the left mouse button, focus is activated. Click [Auto] menu to auto focus function. Zoom Allow to enlarge or reduce the image size. Holding down [Tele]/[Wide] menu with the left mouse button, zoom is activated. Bright Allow to open IRIS to increase the brightness or close IRIS to decrease the brightness.
Adjusting your image with GUI Red / Blue Allow to adjust image color through the red/blue gain control Holding down [Up]/[Down] menu with the left mouse button, red/blue gain control is activated. AWC Allow to adjust image color automatically through automatic white balance control Click [AWC] menu with the left mouse button, AWC function is executed once.
Adjusting your image with GUI Digital section Digital menu deals with various digital image processing function. Freeze Allow to keep the current image on the screen. Click[Freeze] menu with the left mouse button, freeze mode is activated and [Freeze] menu turns checked state. To release freeze mode, click [freeze] menu again or click [Cancel] menu with the left mouse button (and then [Freeze] menu turns unchecked state). Rotate Allow to rotate the image by 0˚(Off), 90°, 180°, 270°.
Adjusting your image with GUI Save / Recall Allow to save the projected image into the memory of digital presenter or recall the image from the memory. To save / recall the image with the proper save number, Click [numbers] menu with the left mouse button, current image is saved into or recalled from memory.
Adjusting your image with GUI Divide Allow to divide the screen to show both of the current image and the image recalled from the memory simultaneously on one screen. Click [numbers] menu with the left mouse button, screen is divided and selected number of image is recalled from memory and activated in menu. Shift Allow to shift the recalled image shown in the divided screen from the left to right to show the hidden portion of the image.
Adjusting your image with GUI 3x3 Multi Allow to see all the images in the memory (up to 8 frames) on one screen. Click [3x3 Multi] menu with the left mouse button, 9 divide mode is activated and GUI menu disappeared. If you click the image number on screen, select image will be expanded to full screen and GUI menu is appeared on the screen. To Release 3x3 Multi mode, click the center image (samsung logo image). Cancel Allow to stop current image processing function and return to normal mode.
Adjusting your image with GUI Miscellaneous section Misc menu deals with miscellaneous function of digital presenter. Preset Save / Exe Allow to save the customized user setting values or to activate the preset user setting. Click [numbers] menu with the left mouse button, current setting value is saved to flash ROM or load setting value from flash ROM.
Adjusting your image with GUI NEGA Effect Allow to switch for negative / positive image (default : positive). Click [NEGA Effect] menu with the left mouse button, current image turns negative image and menu turns checked state. To return positive image, click [NEGA Effect] menu again (and then menu turns unchecked state). Aperture Allow to control the sharpness of the output image (default : On) Click [Aperture] menu with the left mouse button to turn on/off aperture mode.
Adjusting your image with GUI Lamp Allow to turn the upper lamps or lightbox on or off. Click [All off/Upper/Lower] menu with the left mouse button, lamp mode is switched to current value. Exit section GUI main menu disappears and only the mouse pointer remains displayed. Tips : Drag and Drop Function GDI main menu can take any position of screen using Drag and Drop. First of all, click the moving point of main menu, and then drag and drop to any position of screen what you want. 1.
Changing your image with Draw SDP-6500 support to GUI Drawing system to draw straight lines, freehand lines, rectangular on the screen with mouse operation. To use GUI Drawing system, first of all, GUI menu system and [Freeze] or [Recall] function must be activated. Then Draw menu is now being activated. (See page 28) When [Draw] menu is clicked, GUI Draw toolbar is appeared on the screen and GUI main menu disappeared.
Changing your image with Draw Exit Button Use the Exit button ( full screen. ) to exit GUI Drawing system to normal mode, or clear all the user’s images on the Tool Selection Use the Line Width Selection to set the line width to between 1 and 4 pixels. Drawing the single line To draw a Single line, Click the single line icon and then, 1) Position the cursor on the screen where you want the line to start. 2) Press and hold the left/right mouse button. 3) Drag the cursor.
Changing your image with Draw Foreground / Background Color Panel There are two active colors in GUI Drawing System, the foreground (left mouse click) and background(right mouse click) colors. You can change the brush colors by selecting new foreground and background solid colors using the Color Palette. Foreground / Background Color Palette Use the Color Palette to select the colors that you want to draw the line. Move the cursor over the available colors panel.
Storage Turn the power off and unplug the power cord. Attach the lens cap. Digital Pre senter SDP-6 500 RO TATE AP ER TU AF RE ZO OM FR EE INT/ ZE EX LA T MP EX AW EX C MOD SX GA XG A SV GA E T1 T2 Dig ital Pre sent er SD P-6 500 Turn the head upside down. While you pull the main lock button toward the front of the presenter, fold the head completely.
Fold the lamps on both sides completely.
Trouble shooting No image appears - Check if the resolution of the output device corresponds to that of the digital presenter. (For example, when the maximum resolution of a projector is SVGA and if the digital presenter is set to XGA or SXGA, then no image appears.) - Check if the input selection of the output device is appropriate. - Check if the iris control is adequate. - Check if the VGA cable is connected to the VGA output terminal correctly. - Check if there is any problem with the fuse.
Fuse and battery replacement Fuse replacement Battery replacement Take out the fuse holder . Open the battery compartment lid at the back of the remote controller. Take out the fuse and replace it. Insert the batteries so that their with a new one. • Fuse type:2A, 250V Put the fuse holder back. • Battery type:AAA type 1.5V Close the lid.
Specifications Note: Spscifications are subject to change without notice.
Memo
HEAD OFFICE : SAMSUNG TECHWIN CO., LTD 145-3 Sangdaewon 1-Dong, Jungwon-Gu, Sungnam, Kyungki-Do,Korea 462-121 TEL : 82-31-740-8137~8141 FAX : 82-31-740-8145 U.S.A OFFICE : SAMSUNG OPTO-ELECTRONICS AMERICA, INC. 40 Seaview Drive, Secaucus N.J.07094, U.S.A TEL : 201-902-0347 FAX : 201-902-9342 www.samsungpresenter.com www.samsungtechwin.com P/No.